Condenser Microphones

sE Electronics Large Diaphragm Tube Condenser Mic with 9 Polar Patterns

The Z5600a II large-diaphragm condenser is one of the most versatile tube mics in today's market. With 9 graded steps through omni, cardioid and figure...

Sale

The Z5600a II large-diaphragm condenser is one of the most versatile tube mics in today's...

SKU: Z5600A-II-U

Availability: In Stock

$1,399.00 $1,099.00

Quick View {"id":7800556781795,"title":"sE Electronics Large Diaphragm Tube Condenser Mic with 9 Polar Patterns","handle":"se-electronics-large-diaphragm-tube-condenser-mic-with-9-polar-patterns-z5600a-ii-u","description":"\u003cp\u003eThe Z5600a II large-diaphragm condenser is one of the most versatile tube mics in today's market. With 9 graded steps through omni, cardioid and figure eight patterns, -10dB pad and bass cut, the Z5600a II finds uses in a huge number of applications, from micing a live drum kit to overheads on a choir. Above all though, this excellent mic has won its praise on delivering superb vocal recordings, with natural warmth and incredible detail. Each Z5600a II capsule is hand-crafted in our own factory where we individually tune every capsule with the absolute highest attention to detail. Features a hand-made metal housing, hand-crafted solid brass chassis and gold-sputtered diaphragms all work together to ensure maximum reliability in all sonic environments for many years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 35mm Twin Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid, Omni, Figure 8 and 5 intermediate stages (selectable on power supply)\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 25.12 mV\/Pa (-32 dB)\u003cbr\u003e\n•\tMax SPL: 127\/137 dB (0\/-10 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tSelf-Noise: 13 dB(A)\u003cbr\u003e\n•\tPass Filter Switch: 50 Hz\u003cbr\u003e\n•\tPreattenuation Pad: -10 dB\u003cbr\u003e\n•\tPower requirement: Dedicated PSU (included)\u003cbr\u003e\n•\tWeight (mic): 850g \/ 30oz\u003cbr\u003e\n•\tWeight (PSU): 1970g \/ 69.50oz\u003cbr\u003e\n•\tTube complement: 1x 12AX7\/ECC83\u003cbr\u003e\n•\tConnectors: 8-pin army connector to mic, XLR from PSU\u003c\/p\u003e","published_at":"2022-07-29T15:51:28-07:00","created_at":"2022-07-29T15:51:29-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":109900,"price_min":109900,"price_max":109900,"available":true,"price_varies":false,"compare_at_price":139900,"compare_at_price_min":139900,"compare_at_price_max":139900,"compare_at_price_varies":false,"variants":[{"id":43176648081635,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Z5600A-II-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Large Diaphragm Tube Condenser Mic with 9 Polar Patterns","public_title":null,"options":["Default Title"],"price":109900,"weight":4536,"compare_at_price":139900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850426001323","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/Z5600A-II-U-1.jpg?v=1659135089"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/Z5600A-II-U-1.jpg?v=1659135089","options":["Title"],"media":[{"alt":null,"id":30499052191971,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/Z5600A-II-U-1.jpg?v=1659135089"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/Z5600A-II-U-1.jpg?v=1659135089","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Z5600a II large-diaphragm condenser is one of the most versatile tube mics in today's market. With 9 graded steps through omni, cardioid and figure eight patterns, -10dB pad and bass cut, the Z5600a II finds uses in a huge number of applications, from micing a live drum kit to overheads on a choir. Above all though, this excellent mic has won its praise on delivering superb vocal recordings, with natural warmth and incredible detail. Each Z5600a II capsule is hand-crafted in our own factory where we individually tune every capsule with the absolute highest attention to detail. Features a hand-made metal housing, hand-crafted solid brass chassis and gold-sputtered diaphragms all work together to ensure maximum reliability in all sonic environments for many years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 35mm Twin Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid, Omni, Figure 8 and 5 intermediate stages (selectable on power supply)\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 25.12 mV\/Pa (-32 dB)\u003cbr\u003e\n•\tMax SPL: 127\/137 dB (0\/-10 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tSelf-Noise: 13 dB(A)\u003cbr\u003e\n•\tPass Filter Switch: 50 Hz\u003cbr\u003e\n•\tPreattenuation Pad: -10 dB\u003cbr\u003e\n•\tPower requirement: Dedicated PSU (included)\u003cbr\u003e\n•\tWeight (mic): 850g \/ 30oz\u003cbr\u003e\n•\tWeight (PSU): 1970g \/ 69.50oz\u003cbr\u003e\n•\tTube complement: 1x 12AX7\/ECC83\u003cbr\u003e\n•\tConnectors: 8-pin army connector to mic, XLR from PSU\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Multi Pattern Large Diaphragm Microphone with Titanium Capsule

The Titanium Diaphragm: -Unusually, the T2 features a hand-crafted titanium-sputtered capsule. This is much stiffer than our gold-sputtered capsules, meaning quicker transient response, which is...

Sale

The Titanium Diaphragm: -Unusually, the T2 features a hand-crafted titanium-sputtered capsule. This is much stiffer...

SKU: SE-T2-U

Availability: In Stock

$699.00 $599.00

Quick View {"id":7800556224739,"title":"sE Electronics Multi Pattern Large Diaphragm Microphone with Titanium Capsule","handle":"se-electronics-multi-pattern-large-diaphragm-microphone-with-titanium-capsule-se-t2-u","description":"\u003cp\u003eThe Titanium Diaphragm: -Unusually, the T2 features a hand-crafted titanium-sputtered capsule. This is much stiffer than our gold-sputtered capsules, meaning quicker transient response, which is important when recording instruments that create fast transients and attack - like drums and percussion - as it enables the microphone to maintain clarity and deliver exceptionally accurate performances. -The stiffness of this special diaphragm also allows it to withstand extremely high sound pressure levels, so it can handle the loudest percussion with ease. Custom Shock Mount + Chassis: -The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around, and used flat against a drumhead or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3\/4\" thick, it fits neatly in the palm of your hand, but is built to take a beating on the road.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 32mm Twin Titanium\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid, Hyper Cardioid, Omni, Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 50 Ohms\u003cbr\u003e\n•\tSensitivity: 25.12 mV\/Pa (-32 dB)\u003cbr\u003e\n•\tMax SPL: 122\/132\/142 dB (0\/-10\/-20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB\u003cbr\u003e\n•\tSelf-Noise: 16 dB(A)\u003cbr\u003e\n•\tPass Filter Switch: 60\/120 Hz\u003cbr\u003e\n•\tPreattenuation Pad: -10\/-20 dB\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 280g \/ 9.88oz\u003c\/p\u003e","published_at":"2022-07-29T15:51:11-07:00","created_at":"2022-07-29T15:51:12-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":59900,"price_min":59900,"price_max":59900,"available":true,"price_varies":false,"compare_at_price":69900,"compare_at_price_min":69900,"compare_at_price_max":69900,"compare_at_price_varies":false,"variants":[{"id":43176646410467,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE-T2-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Multi Pattern Large Diaphragm Microphone with Titanium Capsule","public_title":null,"options":["Default Title"],"price":59900,"weight":907,"compare_at_price":69900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850426001507","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE-T2-U-1.jpg?v=1659135072"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE-T2-U-1.jpg?v=1659135072","options":["Title"],"media":[{"alt":null,"id":30499050127587,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE-T2-U-1.jpg?v=1659135072"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE-T2-U-1.jpg?v=1659135072","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Titanium Diaphragm: -Unusually, the T2 features a hand-crafted titanium-sputtered capsule. This is much stiffer than our gold-sputtered capsules, meaning quicker transient response, which is important when recording instruments that create fast transients and attack - like drums and percussion - as it enables the microphone to maintain clarity and deliver exceptionally accurate performances. -The stiffness of this special diaphragm also allows it to withstand extremely high sound pressure levels, so it can handle the loudest percussion with ease. Custom Shock Mount + Chassis: -The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around, and used flat against a drumhead or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3\/4\" thick, it fits neatly in the palm of your hand, but is built to take a beating on the road.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 32mm Twin Titanium\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid, Hyper Cardioid, Omni, Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 50 Ohms\u003cbr\u003e\n•\tSensitivity: 25.12 mV\/Pa (-32 dB)\u003cbr\u003e\n•\tMax SPL: 122\/132\/142 dB (0\/-10\/-20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB\u003cbr\u003e\n•\tSelf-Noise: 16 dB(A)\u003cbr\u003e\n•\tPass Filter Switch: 60\/120 Hz\u003cbr\u003e\n•\tPreattenuation Pad: -10\/-20 dB\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 280g \/ 9.88oz\u003c\/p\u003e"}

USB Microphones

Reloop SPODCASTER-GO USB Microphone for Streaming & Podcast

RETRO-STYLE MOBILE SPODCASTER STUDIO MICROPHONE Quality and flexibility are more important than ever for musicians and podcasters nowadays. The professional USB condenser microphone continues the...

Sale

RETRO-STYLE MOBILE SPODCASTER STUDIO MICROPHONE Quality and flexibility are more important than ever for musicians...

SKU: AMS-SPODCASTER-GO

Availability: In Stock

$129.99 $99.99

Quick View {"id":8046826848483,"title":"Reloop SPODCASTER-GO USB Microphone for Streaming \u0026 Podcast","handle":"reloop-spodcaster-go-usb-microphone-for-streaming-podcast-ams-spodcaster-go","description":"\u003cp\u003eRETRO-STYLE MOBILE SPODCASTER STUDIO MICROPHONE Quality and flexibility are more important than ever for musicians and podcasters nowadays. The professional USB condenser microphone continues the successful sPodcaster series in an outstanding retro design and is built in a portable and slim aluminium housing. RECORDING \u0026amp; MONITORING IN ONE DEVICE Both the dubbing of musical instruments and the recording of speech and vocals, whether on the road or in project studios, are recorded in studio quality with high-quality A\/D converters, thanks to the integrated audio interface (class compliant). Thanks to the advantageous cardioid polar pattern, the system is directed towards a sound source, so that ambient noise and feedback are largely cancelled out. JACK CONNECTOR \u0026amp; MICRO-USB PORT The 3.5 mm jack connector on the back panel allows you to connect headphones or speakers to listen instantly to the recording. All of the computer's audio output is thus played back via the sPodcaster Go's audio interface and can be comfortably adjusted using the volume buttons. A USB connection between PC or Mac is plug 'n' play without any additional driver installation and also supplies the microphone with power. SMART CONSTRUCTION The tabletop stand, pre-mounted on the underside of the microphone, folds completely to transport the sPodcaster Go in a space-saving manner. Alternatively, the table stand can be unscrewed to allow attachment to a conventional stand with M10 threads. The sPodcaster Go's rugged construction makes it well-prepared for the daily challenges of mobile use. INCL. USB CABLE \u0026amp; TRANSPORT POUCH The Reloop sPodcaster Go includes a matching USB cable and a functional carrying bag.\u003c\/p\u003e\n\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\n\u003cp\u003e•\tProfessional USB condenser microphone for portable podcasting\u003cbr\u003e\n•\tSuitable for vocal and instrumental recordings\u003cbr\u003e\n•\tPerfect for recording on the go and smaller studio environments\u003cbr\u003e\n•\tDirectional characteristic: cardioid\u003cbr\u003e\n•\tUSB 2.0 connection (USB bus-powered)\u003cbr\u003e\n•\tPlug'n'Play for PC and Mac\u003cbr\u003e\n•\tIntegrated USB audio interface (class compliant)\u003cbr\u003e\n•\tConnect directly to mic to monitor recordings from computer\u003cbr\u003e\n•\tLow-latency transmission\u003cbr\u003e\n•\tVolume +\/- buttons for adjusting headphone output\u003cbr\u003e\n•\tLarge mic mute button on the front\u003cbr\u003e\n•\t16 bit resolution and 48 kHz A\/D converter\u003cbr\u003e\n•\t3.5 mm jack and Micro-USB connection\u003cbr\u003e\n•\tRigid design made of lightweight aluminium\u003cbr\u003e\n•\tIncl. smart foldable stand construction (removable \u0026amp; with M10 thread)\u003cbr\u003e\n•\tPower\/voltage: 5.0V DC\/ 500 mA (USB)\u003cbr\u003e\n•\tFrequency range: 50 Hz – 18 kHz\u003cbr\u003e\n•\tSensitivity: -44 +\/- 5 dB (at 1 kHz , 0 dB = 1V\/PA)\u003cbr\u003e\n•\tDynamic range: 93 dB\u003cbr\u003e\n•\tS\/N ratio: 59 dB (at 1 kHz)\u003cbr\u003e\n•\tMax. input sound pressure: 115 dB\u003cbr\u003e\n•\tConnection: USB 2.0 (Micro-USB)\u003cbr\u003e\n•\tDirectivity: cardioid\u003cbr\u003e\n•\tSupports resolution\/sample rate up to: 16 bit \/ 48 kHz\u003cbr\u003e\n•\tOperating system: Windows 7, 8, 10 \/ macOS 9 \/ OS X\u003cbr\u003e\n•\tDimensions: 63 x 146,2 x 42,8 mm\u003cbr\u003e\n•\tWeight: 140 g\u003c\/p\u003e","published_at":"2023-03-02T16:45:06-08:00","created_at":"2023-03-02T16:45:12-08:00","vendor":"Reloop","type":"USB Microphones","tags":["Condenser Microphones","USB Microphones","Wired Microphones"],"price":9999,"price_min":9999,"price_max":9999,"available":true,"price_varies":false,"compare_at_price":12999,"compare_at_price_min":12999,"compare_at_price_max":12999,"compare_at_price_varies":false,"variants":[{"id":43743573803235,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AMS-SPODCASTER-GO","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Reloop SPODCASTER-GO USB Microphone for Streaming \u0026 Podcast","public_title":null,"options":["Default Title"],"price":9999,"weight":454,"compare_at_price":12999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"4043034168113","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-1.jpg?v=1677804312","\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-2.jpg?v=1677804312","\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-3.jpg?v=1677804312","\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-4.jpg?v=1677804312","\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-5.jpg?v=1677804312"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-1.jpg?v=1677804312","options":["Title"],"media":[{"alt":null,"id":31877668634851,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-1.jpg?v=1677804312"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-1.jpg?v=1677804312","width":2500},{"alt":null,"id":31877668667619,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-2.jpg?v=1677804312"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-2.jpg?v=1677804312","width":2500},{"alt":null,"id":31877668700387,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-3.jpg?v=1677804312"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-3.jpg?v=1677804312","width":2500},{"alt":null,"id":31877668733155,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-4.jpg?v=1677804312"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-4.jpg?v=1677804312","width":2500},{"alt":null,"id":31877668765923,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-5.jpg?v=1677804312"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/AMS-sPODCASTER-GO-5.jpg?v=1677804312","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eRETRO-STYLE MOBILE SPODCASTER STUDIO MICROPHONE Quality and flexibility are more important than ever for musicians and podcasters nowadays. The professional USB condenser microphone continues the successful sPodcaster series in an outstanding retro design and is built in a portable and slim aluminium housing. RECORDING \u0026amp; MONITORING IN ONE DEVICE Both the dubbing of musical instruments and the recording of speech and vocals, whether on the road or in project studios, are recorded in studio quality with high-quality A\/D converters, thanks to the integrated audio interface (class compliant). Thanks to the advantageous cardioid polar pattern, the system is directed towards a sound source, so that ambient noise and feedback are largely cancelled out. JACK CONNECTOR \u0026amp; MICRO-USB PORT The 3.5 mm jack connector on the back panel allows you to connect headphones or speakers to listen instantly to the recording. All of the computer's audio output is thus played back via the sPodcaster Go's audio interface and can be comfortably adjusted using the volume buttons. A USB connection between PC or Mac is plug 'n' play without any additional driver installation and also supplies the microphone with power. SMART CONSTRUCTION The tabletop stand, pre-mounted on the underside of the microphone, folds completely to transport the sPodcaster Go in a space-saving manner. Alternatively, the table stand can be unscrewed to allow attachment to a conventional stand with M10 threads. The sPodcaster Go's rugged construction makes it well-prepared for the daily challenges of mobile use. INCL. USB CABLE \u0026amp; TRANSPORT POUCH The Reloop sPodcaster Go includes a matching USB cable and a functional carrying bag.\u003c\/p\u003e\n\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\n\u003cp\u003e•\tProfessional USB condenser microphone for portable podcasting\u003cbr\u003e\n•\tSuitable for vocal and instrumental recordings\u003cbr\u003e\n•\tPerfect for recording on the go and smaller studio environments\u003cbr\u003e\n•\tDirectional characteristic: cardioid\u003cbr\u003e\n•\tUSB 2.0 connection (USB bus-powered)\u003cbr\u003e\n•\tPlug'n'Play for PC and Mac\u003cbr\u003e\n•\tIntegrated USB audio interface (class compliant)\u003cbr\u003e\n•\tConnect directly to mic to monitor recordings from computer\u003cbr\u003e\n•\tLow-latency transmission\u003cbr\u003e\n•\tVolume +\/- buttons for adjusting headphone output\u003cbr\u003e\n•\tLarge mic mute button on the front\u003cbr\u003e\n•\t16 bit resolution and 48 kHz A\/D converter\u003cbr\u003e\n•\t3.5 mm jack and Micro-USB connection\u003cbr\u003e\n•\tRigid design made of lightweight aluminium\u003cbr\u003e\n•\tIncl. smart foldable stand construction (removable \u0026amp; with M10 thread)\u003cbr\u003e\n•\tPower\/voltage: 5.0V DC\/ 500 mA (USB)\u003cbr\u003e\n•\tFrequency range: 50 Hz – 18 kHz\u003cbr\u003e\n•\tSensitivity: -44 +\/- 5 dB (at 1 kHz , 0 dB = 1V\/PA)\u003cbr\u003e\n•\tDynamic range: 93 dB\u003cbr\u003e\n•\tS\/N ratio: 59 dB (at 1 kHz)\u003cbr\u003e\n•\tMax. input sound pressure: 115 dB\u003cbr\u003e\n•\tConnection: USB 2.0 (Micro-USB)\u003cbr\u003e\n•\tDirectivity: cardioid\u003cbr\u003e\n•\tSupports resolution\/sample rate up to: 16 bit \/ 48 kHz\u003cbr\u003e\n•\tOperating system: Windows 7, 8, 10 \/ macOS 9 \/ OS X\u003cbr\u003e\n•\tDimensions: 63 x 146,2 x 42,8 mm\u003cbr\u003e\n•\tWeight: 140 g\u003c\/p\u003e"}

Condenser Microphones

sE Electronics X1 S Microphone & Reflexion Filter X, Shockmount & Cable Bundle

If you're recording in a non-acoustically treated space (bedrooms, closets, etc.), a Reflexion Filter helps keep your signal clean without the sound of your room...

Sale

If you're recording in a non-acoustically treated space (bedrooms, closets, etc.), a Reflexion Filter helps...

SKU: X1-S-STUDIO-BUNDLE-U

Availability: In Stock

$399.00 $249.00

Quick View {"id":7800558977251,"title":"sE Electronics X1 S Microphone \u0026 Reflexion Filter X, Shockmount \u0026 Cable Bundle","handle":"se-electronics-x1-s-microphone-reflexion-filter-x-shockmount-cable-bundle-x1-s-studio-bundle-u","description":"\u003cp\u003eIf you're recording in a non-acoustically treated space (bedrooms, closets, etc.), a Reflexion Filter helps keep your signal clean without the sound of your room around it. The X1 S Studio Bundle has everything from the Vocal Pack, plus our simple and effective RF-X so you can record anywhere you want.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tPolar Pattern for X1S - Cardioid\u003cbr\u003e\n•\tFrequency Range for X1S - 20Hz to 20kHz\u003cbr\u003e\n•\tX1S Phantom Power- 48v\u003cbr\u003e\n•\tX1S Impedance - 125 Ohms\u003cbr\u003e\n•\tX1S Signal to Noise Ratio - 85db\u003c\/p\u003e","published_at":"2022-07-29T15:52:35-07:00","created_at":"2022-07-29T15:52:36-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":24900,"price_min":24900,"price_max":24900,"available":true,"price_varies":false,"compare_at_price":39900,"compare_at_price_min":39900,"compare_at_price_max":39900,"compare_at_price_varies":false,"variants":[{"id":43176650735843,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X1-S-STUDIO-BUNDLE-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics X1 S Microphone \u0026 Reflexion Filter X, Shockmount \u0026 Cable Bundle","public_title":null,"options":["Default Title"],"price":24900,"weight":907,"compare_at_price":39900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011195","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-STUDIO-BUNDLE-U-1.jpg?v=1659135156"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-STUDIO-BUNDLE-U-1.jpg?v=1659135156","options":["Title"],"media":[{"alt":null,"id":30499060187363,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-STUDIO-BUNDLE-U-1.jpg?v=1659135156"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-STUDIO-BUNDLE-U-1.jpg?v=1659135156","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eIf you're recording in a non-acoustically treated space (bedrooms, closets, etc.), a Reflexion Filter helps keep your signal clean without the sound of your room around it. The X1 S Studio Bundle has everything from the Vocal Pack, plus our simple and effective RF-X so you can record anywhere you want.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tPolar Pattern for X1S - Cardioid\u003cbr\u003e\n•\tFrequency Range for X1S - 20Hz to 20kHz\u003cbr\u003e\n•\tX1S Phantom Power- 48v\u003cbr\u003e\n•\tX1S Impedance - 125 Ohms\u003cbr\u003e\n•\tX1S Signal to Noise Ratio - 85db\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Vintage Edition Factory Matched Pair of sE8 Microphones

As with all our factory-matched pairs, every mic ending up in a sE8 Stereo Pair configuration is hand-selected from hundreds of individual microphones. This ensures...

Sale

As with all our factory-matched pairs, every mic ending up in a sE8 Stereo Pair...

SKU: SE8-PAIR-VINT-ED-U

Availability: In Stock

$599.00 $519.00

Quick View {"id":7800558715107,"title":"sE Electronics Vintage Edition Factory Matched Pair of sE8 Microphones","handle":"se-electronics-vintage-edition-factory-matched-pair-of-se8-microphones-se8-pair-vint-ed-u","description":"\u003cp\u003eAs with all our factory-matched pairs, every mic ending up in a sE8 Stereo Pair configuration is hand-selected from hundreds of individual microphones. This ensures identical performance and the highest possible mic-to-mic consistency, so you can rest assured that your stereo image will be as clear \u0026amp; accurate as possible. There are many things to expect when buying these as a pair. Handcrafted True Condenser Capsule: -Gold-sputtered diaphragms ensure maximum reliability -Every capsule is handcrafted and individually tuned in our very own factory -Ultra-precision electrode design optimized for superb linearity and natural sonics -Ultra-thin 3 micron gold-sputtered diaphragm for superior transients -Newly-developed backplate design provides smooth, natural sound \u0026amp; truly consistent off-axis response -Sophisticated acoustic design with precision components -Avoids coloration in demanding applications The Quietest Pencil Mic In Its Class: -Sophisticated electronic design provides extremely low noise without the use of integrated circuits -Transformerless design for excellent transparency and clarity -Proven Class-A circuitry ensures a high dynamic range without distortion and brilliant transient response Two Switchable Pre-Attenuation Pads: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more. Two switchable low-cut filters: -Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -Unlike the cheaply constructed bodies of some small-capsule microphones, the sE8's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish and gold-plated XLR connector ensures a great look and a loss-free, reliable signal connection for years to come. -The sE8 also comes standard with a newly designed mic clip that will securely attach it to any mic stand.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted Small-Diaphragm True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 25 mV\/Pa (-32 dBV)\u003cbr\u003e\n•\tMax SPL: 139 \/ 149 \/ 159 dBSPL (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 13 dB(A)\u003cbr\u003e\n•\tDynamic range: 126 \/ 136 \/ 146 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 110 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 2.7 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter- 23mm (0.91 in), Length- 120mm (4.72 in)\u003c\/p\u003e","published_at":"2022-07-29T15:52:26-07:00","created_at":"2022-07-29T15:52:27-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":51900,"price_min":51900,"price_max":51900,"available":true,"price_varies":false,"compare_at_price":59900,"compare_at_price_min":59900,"compare_at_price_max":59900,"compare_at_price_varies":false,"variants":[{"id":43176650342627,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE8-PAIR-VINT-ED-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Vintage Edition Factory Matched Pair of sE8 Microphones","public_title":null,"options":["Default Title"],"price":51900,"weight":907,"compare_at_price":59900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011881","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-PAIR-VINT-ED-U-1.jpg?v=1659135147"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-PAIR-VINT-ED-U-1.jpg?v=1659135147","options":["Title"],"media":[{"alt":null,"id":30499059499235,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-PAIR-VINT-ED-U-1.jpg?v=1659135147"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-PAIR-VINT-ED-U-1.jpg?v=1659135147","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAs with all our factory-matched pairs, every mic ending up in a sE8 Stereo Pair configuration is hand-selected from hundreds of individual microphones. This ensures identical performance and the highest possible mic-to-mic consistency, so you can rest assured that your stereo image will be as clear \u0026amp; accurate as possible. There are many things to expect when buying these as a pair. Handcrafted True Condenser Capsule: -Gold-sputtered diaphragms ensure maximum reliability -Every capsule is handcrafted and individually tuned in our very own factory -Ultra-precision electrode design optimized for superb linearity and natural sonics -Ultra-thin 3 micron gold-sputtered diaphragm for superior transients -Newly-developed backplate design provides smooth, natural sound \u0026amp; truly consistent off-axis response -Sophisticated acoustic design with precision components -Avoids coloration in demanding applications The Quietest Pencil Mic In Its Class: -Sophisticated electronic design provides extremely low noise without the use of integrated circuits -Transformerless design for excellent transparency and clarity -Proven Class-A circuitry ensures a high dynamic range without distortion and brilliant transient response Two Switchable Pre-Attenuation Pads: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more. Two switchable low-cut filters: -Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -Unlike the cheaply constructed bodies of some small-capsule microphones, the sE8's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish and gold-plated XLR connector ensures a great look and a loss-free, reliable signal connection for years to come. -The sE8 also comes standard with a newly designed mic clip that will securely attach it to any mic stand.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted Small-Diaphragm True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 25 mV\/Pa (-32 dBV)\u003cbr\u003e\n•\tMax SPL: 139 \/ 149 \/ 159 dBSPL (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 13 dB(A)\u003cbr\u003e\n•\tDynamic range: 126 \/ 136 \/ 146 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 110 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 2.7 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter- 23mm (0.91 in), Length- 120mm (4.72 in)\u003c\/p\u003e"}

Condenser Microphones

sE Electronics X1 S Microphone with Shockmount and Cable Pack

The sE Electronics X1 S Vocal Pack gives you everything you need to start recording in your project or home studio. The X1 Vocal Pack...

Sale

The sE Electronics X1 S Vocal Pack gives you everything you need to start recording...

SKU: X1-S-VOCAL-PACK-U

Availability: In Stock

$299.00 $199.00

Quick View {"id":7800559075555,"title":"sE Electronics X1 S Microphone with Shockmount and Cable Pack","handle":"se-electronics-x1-s-microphone-with-shockmount-and-cable-pack-x1-s-vocal-pack-u","description":"\u003cp\u003eThe sE Electronics X1 S Vocal Pack gives you everything you need to start recording in your project or home studio. The X1 Vocal Pack includes all your recording essentials: an sE X1 S condenser microphone, a shock mount, an sE Metal Pop Filter, and a high-quality 3m mic cable. The unique shock mount mounting system makes for quick and easy setup. Whether you're recording vocals, acoustic instruments, or anything else, there's big value in the sE Electronic X1 S Vocal Pack.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tBundle with microphone, shock mount, pop filter, and microphone cable\u003cbr\u003e\n•\tA large-diaphragm condenser microphone that's excellent for vocals and acoustic instruments\u003cbr\u003e\n•\tHand-made, gold-sputtered 1\" capsule and extremely clear signal path provide a wide-open sound\u003cbr\u003e\n•\tAll-metal capsule, with no plastic parts for long term reliability\u003cbr\u003e\n•\tFixed cardioid polar pattern provides tonal consistency and excellent off-axis sound rejection\u003cbr\u003e\n•\tSwitchable -10dB\/-20dB pad lets you get the extra headroom you need when miking loud sound sources\u003cbr\u003e\n•\tHandles loud sound sources up to 160dB SPL without distortion\u003cbr\u003e\n•\tSwitchable two-position high pass filter cuts out low-frequency rumble and reduces proximity effect\u003cbr\u003e\n•\tRequires +48V phantom power\u003c\/p\u003e","published_at":"2022-07-29T15:52:36-07:00","created_at":"2022-07-29T15:52:38-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":19900,"price_min":19900,"price_max":19900,"available":true,"price_varies":false,"compare_at_price":29900,"compare_at_price_min":29900,"compare_at_price_max":29900,"compare_at_price_varies":false,"variants":[{"id":43176650834147,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X1-S-VOCAL-PACK-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics X1 S Microphone with Shockmount and Cable Pack","public_title":null,"options":["Default Title"],"price":19900,"weight":907,"compare_at_price":29900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011201","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-VOCAL-PACK-U-1.jpg?v=1659135158"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-VOCAL-PACK-U-1.jpg?v=1659135158","options":["Title"],"media":[{"alt":null,"id":30499060515043,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-VOCAL-PACK-U-1.jpg?v=1659135158"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-VOCAL-PACK-U-1.jpg?v=1659135158","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe sE Electronics X1 S Vocal Pack gives you everything you need to start recording in your project or home studio. The X1 Vocal Pack includes all your recording essentials: an sE X1 S condenser microphone, a shock mount, an sE Metal Pop Filter, and a high-quality 3m mic cable. The unique shock mount mounting system makes for quick and easy setup. Whether you're recording vocals, acoustic instruments, or anything else, there's big value in the sE Electronic X1 S Vocal Pack.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tBundle with microphone, shock mount, pop filter, and microphone cable\u003cbr\u003e\n•\tA large-diaphragm condenser microphone that's excellent for vocals and acoustic instruments\u003cbr\u003e\n•\tHand-made, gold-sputtered 1\" capsule and extremely clear signal path provide a wide-open sound\u003cbr\u003e\n•\tAll-metal capsule, with no plastic parts for long term reliability\u003cbr\u003e\n•\tFixed cardioid polar pattern provides tonal consistency and excellent off-axis sound rejection\u003cbr\u003e\n•\tSwitchable -10dB\/-20dB pad lets you get the extra headroom you need when miking loud sound sources\u003cbr\u003e\n•\tHandles loud sound sources up to 160dB SPL without distortion\u003cbr\u003e\n•\tSwitchable two-position high pass filter cuts out low-frequency rumble and reduces proximity effect\u003cbr\u003e\n•\tRequires +48V phantom power\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Vintage Edition Large Diaphragm Cardioid Condenser Mic

Handcrafted 1 True Condenser Capsule: -Although the sE2200 is a cardioid-only microphone, two (instead of one) gold-sputtered diaphragms are used to ensure best possible acoustic...

Sale

Handcrafted 1 True Condenser Capsule: -Although the sE2200 is a cardioid-only microphone, two (instead of...

SKU: SE2200-VINT-ED-U

Availability: In Stock

$349.00 $299.00

Quick View {"id":7800558584035,"title":"sE Electronics Vintage Edition Large Diaphragm Cardioid Condenser Mic","handle":"se-electronics-vintage-edition-large-diaphragm-cardioid-condenser-mic-se2200-vint-ed-u","description":"\u003cp\u003eHandcrafted 1 True Condenser Capsule: -Although the sE2200 is a cardioid-only microphone, two (instead of one) gold-sputtered diaphragms are used to ensure best possible acoustic performance. -Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in Shanghai - and unlike other microphones with backplate or electret designs, the sE2200 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect. Traditional Class-A Electronic Design: -Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2200’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances. Two Switchable Attenuation Levels \u0026amp; Low-Cut Filters: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -Selectable at either 80Hz or 160Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. Custom-Built Output Transformer: -Reviving the spirit of classic studio microphones, the sE2200’s custom transformer provides superb depth \u0026amp; weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation. All-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other affordable microphones, the sE2200's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-crafted 1\" True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 23.7 mV\/Pa (-32.5 dBV)\u003cbr\u003e\n•\tMax SPL: 125 \/ 135 \/ 145 dB (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 8 dB(A)\u003cbr\u003e\n•\tDynamic range: 117 \/ 127 \/ 137 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 86 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 4.2 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)\u003cbr\u003e\n•\tWeight: 611 g (21.55 oz.)\u003c\/p\u003e","published_at":"2022-07-29T15:52:23-07:00","created_at":"2022-07-29T15:52:24-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":29900,"price_min":29900,"price_max":29900,"available":true,"price_varies":false,"compare_at_price":34900,"compare_at_price_min":34900,"compare_at_price_max":34900,"compare_at_price_varies":false,"variants":[{"id":43176650211555,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE2200-VINT-ED-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Vintage Edition Large Diaphragm Cardioid Condenser Mic","public_title":null,"options":["Default Title"],"price":29900,"weight":907,"compare_at_price":34900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011898","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2200-VINT-ED-U-1.jpg?v=1659135144"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2200-VINT-ED-U-1.jpg?v=1659135144","options":["Title"],"media":[{"alt":null,"id":30499059040483,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2200-VINT-ED-U-1.jpg?v=1659135144"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2200-VINT-ED-U-1.jpg?v=1659135144","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHandcrafted 1 True Condenser Capsule: -Although the sE2200 is a cardioid-only microphone, two (instead of one) gold-sputtered diaphragms are used to ensure best possible acoustic performance. -Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in Shanghai - and unlike other microphones with backplate or electret designs, the sE2200 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect. Traditional Class-A Electronic Design: -Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2200’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances. Two Switchable Attenuation Levels \u0026amp; Low-Cut Filters: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -Selectable at either 80Hz or 160Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. Custom-Built Output Transformer: -Reviving the spirit of classic studio microphones, the sE2200’s custom transformer provides superb depth \u0026amp; weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation. All-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other affordable microphones, the sE2200's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-crafted 1\" True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 23.7 mV\/Pa (-32.5 dBV)\u003cbr\u003e\n•\tMax SPL: 125 \/ 135 \/ 145 dB (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 8 dB(A)\u003cbr\u003e\n•\tDynamic range: 117 \/ 127 \/ 137 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 86 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 4.2 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)\u003cbr\u003e\n•\tWeight: 611 g (21.55 oz.)\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Matched Pair of R17 with Shockmounts B57 and custom case

When purchased as a pair, the transformers and cardioid capsules are factory-matched for perfect tolerance, guaranteeing the best possible stereo image. This configuration also includes...

Sale

When purchased as a pair, the transformers and cardioid capsules are factory-matched for perfect tolerance,...

SKU: RN17-PAIR-U

Availability: In Stock

$2,799.00 $2,199.00

Quick View {"id":7800557371619,"title":"sE Electronics Matched Pair of R17 with Shockmounts B57 and custom case","handle":"se-electronics-matched-pair-of-r17-with-shockmounts-b57-and-custom-case-rn17-pair-u","description":"\u003cp\u003eWhen purchased as a pair, the transformers and cardioid capsules are factory-matched for perfect tolerance, guaranteeing the best possible stereo image. This configuration also includes a precision stereo mounting bar, two shock mounts, a wooden presentation case, and empty canisters for future capsule additions. The whole setup comes packaged inside a secure flight case. The Small Diaphragm: -With a 15mm diaphragm (the world's smallest production gold-sputtered diaphragm), the transient response of the RN17 is unparalleled. Such a small capsule reacts extremely quickly and is therefore adept at picking up the most delicate of high-frequency content. The Massive Transformer: -Made obvious by the unusual chassis shape, the RN17's transformer is substantially larger than the norm. This full-scale transformer was custom-designed by Rupert Neve specifically for this microphone - and nobody has been designing audio transformers longer (or better) than Rupert Neve. With an audio transformer of this magnitude, the RN17 can put out astonishing clarity across all frequencies - not just the highs. The midrange is detailed and forward, the lows are full and accurate, and the whole microphone has a balance and headroom never achieved with a small-capsule microphone. Matte Black Finish: -The matte black finish minimizes the level of visual attention drawn to the microphone when used on stage or in the studio, allowing it to blend into the background. Additional Capsules: -The RN17 ships standard with a cardioid capsule, but an omnidirectional capsule is also available for purchase separately.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 17.2mm Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid (omnidirectional capsule available separately)\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 5.96 mV\/Pa (-44.5dB)\u003cbr\u003e\n•\tSensitivity (Figure-8): 2.51 mV\/Pa (-52dB)\u003cbr\u003e\n•\tMax SPL: 131 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 76 dB\u003cbr\u003e\n•\tSelf-Noise: 18 dB(A) (cardioid), 15 dB(A) (omni)\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 245 g \/ 8.64 oz\u003cbr\u003e\n•\tDiameter: 44 mm (transformer), 17mm (capsule)\u003cbr\u003e\n•\tLength: 200 mm\u003cbr\u003e\n•\tDimensions: 300 x 25 mm\u003cbr\u003e\n•\tMax. width between mic mounts: 276 mm\u003cbr\u003e\n•\tMin. width between mic mounts: 58 mm\u003c\/p\u003e","published_at":"2022-07-29T15:51:41-07:00","created_at":"2022-07-29T15:51:42-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":219900,"price_min":219900,"price_max":219900,"available":true,"price_varies":false,"compare_at_price":279900,"compare_at_price_min":279900,"compare_at_price_max":279900,"compare_at_price_varies":false,"variants":[{"id":43176648736995,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RN17-PAIR-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Matched Pair of R17 with Shockmounts B57 and custom case","public_title":null,"options":["Default Title"],"price":219900,"weight":907,"compare_at_price":279900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850426001774","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RN17-PAIR-U-1.jpg?v=1659135102"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RN17-PAIR-U-1.jpg?v=1659135102","options":["Title"],"media":[{"alt":null,"id":30499054125283,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RN17-PAIR-U-1.jpg?v=1659135102"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RN17-PAIR-U-1.jpg?v=1659135102","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eWhen purchased as a pair, the transformers and cardioid capsules are factory-matched for perfect tolerance, guaranteeing the best possible stereo image. This configuration also includes a precision stereo mounting bar, two shock mounts, a wooden presentation case, and empty canisters for future capsule additions. The whole setup comes packaged inside a secure flight case. The Small Diaphragm: -With a 15mm diaphragm (the world's smallest production gold-sputtered diaphragm), the transient response of the RN17 is unparalleled. Such a small capsule reacts extremely quickly and is therefore adept at picking up the most delicate of high-frequency content. The Massive Transformer: -Made obvious by the unusual chassis shape, the RN17's transformer is substantially larger than the norm. This full-scale transformer was custom-designed by Rupert Neve specifically for this microphone - and nobody has been designing audio transformers longer (or better) than Rupert Neve. With an audio transformer of this magnitude, the RN17 can put out astonishing clarity across all frequencies - not just the highs. The midrange is detailed and forward, the lows are full and accurate, and the whole microphone has a balance and headroom never achieved with a small-capsule microphone. Matte Black Finish: -The matte black finish minimizes the level of visual attention drawn to the microphone when used on stage or in the studio, allowing it to blend into the background. Additional Capsules: -The RN17 ships standard with a cardioid capsule, but an omnidirectional capsule is also available for purchase separately.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 17.2mm Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid (omnidirectional capsule available separately)\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 5.96 mV\/Pa (-44.5dB)\u003cbr\u003e\n•\tSensitivity (Figure-8): 2.51 mV\/Pa (-52dB)\u003cbr\u003e\n•\tMax SPL: 131 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 76 dB\u003cbr\u003e\n•\tSelf-Noise: 18 dB(A) (cardioid), 15 dB(A) (omni)\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 245 g \/ 8.64 oz\u003cbr\u003e\n•\tDiameter: 44 mm (transformer), 17mm (capsule)\u003cbr\u003e\n•\tLength: 200 mm\u003cbr\u003e\n•\tDimensions: 300 x 25 mm\u003cbr\u003e\n•\tMax. width between mic mounts: 276 mm\u003cbr\u003e\n•\tMin. width between mic mounts: 58 mm\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Small Diaphragm Microphone with Changeable Capsule

The Small Diaphragm: -With a 15mm diaphragm (the world's smallest production gold-sputtered diaphragm), the transient response of the RN17 is unparalleled. Such a small capsule...

Sale

The Small Diaphragm: -With a 15mm diaphragm (the world's smallest production gold-sputtered diaphragm), the transient...

SKU: RN17-U

Availability: Out Stock

Sold Out

Add to cart

Quick View {"id":7800557240547,"title":"sE Electronics Small Diaphragm Microphone with Changeable Capsule","handle":"se-electronics-small-diaphragm-microphone-with-changeable-capsule-rn17-u","description":"\u003cp\u003eThe Small Diaphragm: -With a 15mm diaphragm (the world's smallest production gold-sputtered diaphragm), the transient response of the RN17 is unparalleled. Such a small capsule reacts extremely quickly and is therefore adept at picking up the most delicate of high-frequency content. The Massive Transformer: -Made obvious by the unusual chassis shape, the RN17's transformer is substantially larger than the norm. This full-scale transformer was custom-designed by Rupert Neve specifically for this microphone - and nobody has been designing audio transformers longer (or better) than Rupert Neve. With an audio transformer of this magnitude, the RN17 can put out astonishing clarity across all frequencies - not just the highs. The midrange is detailed and forward, the lows are full and accurate, and the whole microphone has a balance and headroom never achieved with a small-capsule microphone. Matte Black Finish: -The matte black finish minimizes the level of visual attention drawn to the microphone when used on stage or in the studio, allowing it to blend into the background. Additional Capsules: -The RN17 ships standard with a cardioid capsule, but an omnidirectional capsule is also available for purchase separately.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 17.2mm Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid (omnidirectional capsule available separately)\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 5.96 mV\/Pa (-44.5dB)\u003cbr\u003e\n•\tSensitivity (Figure-8): 2.51 mV\/Pa (-52dB)\u003cbr\u003e\n•\tMax SPL: 131 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 76 dB\u003cbr\u003e\n•\tSelf Noise: 18 dB(A) (cardioid), 15 dB(A) (omni)\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 320g \/ 11.32oz\u003cbr\u003e\n•\tDiameter: 44 mm (transformer), 17mm (capsule)\u003cbr\u003e\n•\tLength: 200 mm\u003c\/p\u003e","published_at":"2022-07-29T15:51:39-07:00","created_at":"2022-07-29T15:51:40-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":109900,"price_min":109900,"price_max":109900,"available":false,"price_varies":false,"compare_at_price":139900,"compare_at_price_min":139900,"compare_at_price_max":139900,"compare_at_price_varies":false,"variants":[{"id":43176648605923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RN17-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"sE Electronics Small Diaphragm Microphone with Changeable Capsule","public_title":null,"options":["Default Title"],"price":109900,"weight":907,"compare_at_price":139900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850426001767","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RN17-U-1.jpg?v=1659135100"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RN17-U-1.jpg?v=1659135100","options":["Title"],"media":[{"alt":null,"id":30499053764835,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RN17-U-1.jpg?v=1659135100"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RN17-U-1.jpg?v=1659135100","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Small Diaphragm: -With a 15mm diaphragm (the world's smallest production gold-sputtered diaphragm), the transient response of the RN17 is unparalleled. Such a small capsule reacts extremely quickly and is therefore adept at picking up the most delicate of high-frequency content. The Massive Transformer: -Made obvious by the unusual chassis shape, the RN17's transformer is substantially larger than the norm. This full-scale transformer was custom-designed by Rupert Neve specifically for this microphone - and nobody has been designing audio transformers longer (or better) than Rupert Neve. With an audio transformer of this magnitude, the RN17 can put out astonishing clarity across all frequencies - not just the highs. The midrange is detailed and forward, the lows are full and accurate, and the whole microphone has a balance and headroom never achieved with a small-capsule microphone. Matte Black Finish: -The matte black finish minimizes the level of visual attention drawn to the microphone when used on stage or in the studio, allowing it to blend into the background. Additional Capsules: -The RN17 ships standard with a cardioid capsule, but an omnidirectional capsule is also available for purchase separately.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 17.2mm Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid (omnidirectional capsule available separately)\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 5.96 mV\/Pa (-44.5dB)\u003cbr\u003e\n•\tSensitivity (Figure-8): 2.51 mV\/Pa (-52dB)\u003cbr\u003e\n•\tMax SPL: 131 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 76 dB\u003cbr\u003e\n•\tSelf Noise: 18 dB(A) (cardioid), 15 dB(A) (omni)\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 320g \/ 11.32oz\u003cbr\u003e\n•\tDiameter: 44 mm (transformer), 17mm (capsule)\u003cbr\u003e\n•\tLength: 200 mm\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Rupert Neve Signature Multi Pattern Tube Microphone

Nine Selectable Polar Patterns: -Precisely-tuned dual-diaphragm capsule design allows you to choose the perfect setting for every application -Minimize unwanted signal bleed with ease Hand-Selected...

Sale

Nine Selectable Polar Patterns: -Precisely-tuned dual-diaphragm capsule design allows you to choose the perfect setting...

SKU: RNT-U

Availability: In Stock

$3,599.00 $2,799.00

Quick View {"id":7800557142243,"title":"sE Electronics Rupert Neve Signature Multi Pattern Tube Microphone","handle":"se-electronics-rupert-neve-signature-multi-pattern-tube-microphone-rnt-u","description":"\u003cp\u003eNine Selectable Polar Patterns: -Precisely-tuned dual-diaphragm capsule design allows you to choose the perfect setting for every application -Minimize unwanted signal bleed with ease Hand-Selected ECC82 Tube \u0026amp; Custom Rupert Neve Designs Audio Transformer: -Each microphone-grade tube is carefully selected and pretested in-house -Allows for stunning realism and depth in recordings -Unique tube circuit design optimized for driving the first custom-made transformer Hand-Crafted Metal Housing With Premium Finish: -All-metal construction built with highest attention to detail -Efficient rejection of any electrical interference and noise -High quality finish ensures a great look for many years A Second Custom-Built Rupert Neve Designs Audio Transformer: -Designed for sweet, musical performance and bulletproof isolation -Provides the legendary sonic character of Rupert Neve's famous transformers Custom-Made, Discrete Class-A Rupert Neve Designs Amplification: -Delivers the sonic character and performance expected from the world's most prized recording equipment -Utilizes the same operational amplifiers found in Rupert Neve Designs' flagship 5088 console -These discrete op-amps ensure enormous headroom, ultra-wide bandwidth, zero crossover distortion, and quality without compromise Active Gain Stage With Three Switchable Levels: -Provides 24dB of extended dynamic range for a wide range of applications -Discrete Rupert Neve Designs op-amp cards ensure pristine performance -Suitable for everything from delicate ambience recordings to close-miking of extremely loud instruments and voices Two Switchable Active Low-Cut Filters: -Custom Rupert Neve Designs op-amps implemented for best possible sound quality -Reduce unwanted rumble or foot-fall noise, or compensate for proximity effect.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule: Handcrafted 1\" diaphragm true condenser\u003cbr\u003e\n•\tTube Complement: 1x 12AU7\/ECC82\u003cbr\u003e\n•\tPolar Patterns: 9 (omni, cardioid, figure-8, plus 3 steps between each)\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20,000 Hz\u003cbr\u003e\n•\tSensitivity: 16 mV\/Pa (-36 dB)\u003cbr\u003e\n•\tGain: -12 \/ 0 \/ +12 dB, switchable\u003cbr\u003e\n•\tMax SPL: 151 dB\u003cbr\u003e\n•\tEquivalent Noise Level: 18 dB(A)\u003cbr\u003e\n•\tDynamic Range: 133 dB\u003cbr\u003e\n•\tSignal to Noise Ratio: 76 dB\u003cbr\u003e\n•\tLow Cut Filter: 40 \/ 80 Hz, 12 dB\/oct, switchable\u003cbr\u003e\n•\tElectrical Impedance: 30 Ohms\u003cbr\u003e\n•\tRecommended Load Impedance: \u0026gt;2k Ohms\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector (floor box)\u003cbr\u003e\n•\tMicrophone Dimensions: Diameter: 62 mm (2.44 in.), Length: 240 mm (9.45 in.)\u003cbr\u003e\n•\tMicrophone Weight: 989 g (34.90 oz.)\u003cbr\u003e\n•\tFloor Box Dimensions: 356 x 135 x 100 mm (14.02 x 5.31 x 3.94 in.)\u003cbr\u003e\n•\tFloor Box Weight: 3,905 g (137.79 oz.)\u003c\/p\u003e","published_at":"2022-07-29T15:51:35-07:00","created_at":"2022-07-29T15:51:37-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":279900,"price_min":279900,"price_max":279900,"available":true,"price_varies":false,"compare_at_price":359900,"compare_at_price_min":359900,"compare_at_price_max":359900,"compare_at_price_varies":false,"variants":[{"id":43176648442083,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RNT-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Rupert Neve Signature Multi Pattern Tube Microphone","public_title":null,"options":["Default Title"],"price":279900,"weight":11340,"compare_at_price":359900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011027","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RNT-U-1.jpg?v=1659135097"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RNT-U-1.jpg?v=1659135097","options":["Title"],"media":[{"alt":null,"id":30499053371619,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RNT-U-1.jpg?v=1659135097"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/RNT-U-1.jpg?v=1659135097","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eNine Selectable Polar Patterns: -Precisely-tuned dual-diaphragm capsule design allows you to choose the perfect setting for every application -Minimize unwanted signal bleed with ease Hand-Selected ECC82 Tube \u0026amp; Custom Rupert Neve Designs Audio Transformer: -Each microphone-grade tube is carefully selected and pretested in-house -Allows for stunning realism and depth in recordings -Unique tube circuit design optimized for driving the first custom-made transformer Hand-Crafted Metal Housing With Premium Finish: -All-metal construction built with highest attention to detail -Efficient rejection of any electrical interference and noise -High quality finish ensures a great look for many years A Second Custom-Built Rupert Neve Designs Audio Transformer: -Designed for sweet, musical performance and bulletproof isolation -Provides the legendary sonic character of Rupert Neve's famous transformers Custom-Made, Discrete Class-A Rupert Neve Designs Amplification: -Delivers the sonic character and performance expected from the world's most prized recording equipment -Utilizes the same operational amplifiers found in Rupert Neve Designs' flagship 5088 console -These discrete op-amps ensure enormous headroom, ultra-wide bandwidth, zero crossover distortion, and quality without compromise Active Gain Stage With Three Switchable Levels: -Provides 24dB of extended dynamic range for a wide range of applications -Discrete Rupert Neve Designs op-amp cards ensure pristine performance -Suitable for everything from delicate ambience recordings to close-miking of extremely loud instruments and voices Two Switchable Active Low-Cut Filters: -Custom Rupert Neve Designs op-amps implemented for best possible sound quality -Reduce unwanted rumble or foot-fall noise, or compensate for proximity effect.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule: Handcrafted 1\" diaphragm true condenser\u003cbr\u003e\n•\tTube Complement: 1x 12AU7\/ECC82\u003cbr\u003e\n•\tPolar Patterns: 9 (omni, cardioid, figure-8, plus 3 steps between each)\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20,000 Hz\u003cbr\u003e\n•\tSensitivity: 16 mV\/Pa (-36 dB)\u003cbr\u003e\n•\tGain: -12 \/ 0 \/ +12 dB, switchable\u003cbr\u003e\n•\tMax SPL: 151 dB\u003cbr\u003e\n•\tEquivalent Noise Level: 18 dB(A)\u003cbr\u003e\n•\tDynamic Range: 133 dB\u003cbr\u003e\n•\tSignal to Noise Ratio: 76 dB\u003cbr\u003e\n•\tLow Cut Filter: 40 \/ 80 Hz, 12 dB\/oct, switchable\u003cbr\u003e\n•\tElectrical Impedance: 30 Ohms\u003cbr\u003e\n•\tRecommended Load Impedance: \u0026gt;2k Ohms\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector (floor box)\u003cbr\u003e\n•\tMicrophone Dimensions: Diameter: 62 mm (2.44 in.), Length: 240 mm (9.45 in.)\u003cbr\u003e\n•\tMicrophone Weight: 989 g (34.90 oz.)\u003cbr\u003e\n•\tFloor Box Dimensions: 356 x 135 x 100 mm (14.02 x 5.31 x 3.94 in.)\u003cbr\u003e\n•\tFloor Box Weight: 3,905 g (137.79 oz.)\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Dual Tube Cardioid Condenser Microphone with Shockmount and Case

Dual Tube design, input tube is a 12AX7 and output tube is a 12AU7. Bass cut filter and -10db pad. Hand crafted true condenser capsule....

Sale

Dual Tube design, input tube is a 12AX7 and output tube is a 12AU7. Bass...

SKU: GEMINI-II-U

Availability: Out Stock

Sold Out

Add to cart

Quick View {"id":7800556749027,"title":"sE Electronics Dual Tube Cardioid Condenser Microphone with Shockmount and Case","handle":"se-electronics-dual-tube-cardioid-condenser-microphone-with-shockmount-and-case-gemini-ii-u","description":"\u003cp\u003eDual Tube design, input tube is a 12AX7 and output tube is a 12AU7. Bass cut filter and -10db pad. Hand crafted true condenser capsule. 35mm gold\/mylar diaphragm. Cardioid directional pattern. 20hz to 20khz frequency range with 35.48mV\/Pa (-29db) sensitivity. 135\/145 Max SPL and 75 db signal to noise ratio. 19 db self-noise, 150hz pass filter switch, an -10db preattenuation pad. Dedicated power supply unit included The Gemini Concept: Dual-Tube Design -Most microphones use a transformer to optimize the mic's output impedance and couple the mic to the mic preamplifier. With the Gemini II, this optimization is accomplished with a second vacuum tube, negating any high frequency roll off typically incurred with a transformer. -This provides the Gemini II with a sparkling, pristine high-end typically only found in the most expensive solid-state microphones, while maintaining the rich, thick tonality of a tube mic. Not just for vocals, the bass cut filter and -10dB pad make the Gemini useful for loud and heavy sources like drum room mics and booming timpani. Handcrafted Capsule \u0026amp; Larger-Than-Life Sound: -The Gemini II has a 1 1\/4” capsule that is handcrafted and individually tuned in our very own factory. -Thanks to a larger-than-life capsule, true condenser technology and ultra-precision parts, the Gemini II delivers a massive sound right out of the box. In addition, the Gemini II’s hand-made metal housing and gold-sputtered diaphragms, ensure maximum reliability in all sonic settings.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 35mm Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 40 mV\/Pa (-28 dB)\u003cbr\u003e\n•\tMax SPL: 135\/145 dB (0\/-10 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tSelf-Noise: 13 dB(A)\u003cbr\u003e\n•\tPass Filter Switch: 150 Hz\u003cbr\u003e\n•\tPreattenuation Pad: -10 dB\u003cbr\u003e\n•\tPower Requirement: Dedicated PSU (included)\u003cbr\u003e\n•\tWeight (mic): 1180g \/ 41.60oz\u003cbr\u003e\n•\tWeight (PSU): 1970g \/ 69.50oz\u003cbr\u003e\n•\tTube complement: 1x 12AX7\/ECC83, 1x 12AU7\/ECC82\u003cbr\u003e\n•\tConnector: XLR3F from PSU\u003c\/p\u003e","published_at":"2022-07-29T15:51:26-07:00","created_at":"2022-07-29T15:51:27-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":159900,"price_min":159900,"price_max":159900,"available":false,"price_varies":false,"compare_at_price":199900,"compare_at_price_min":199900,"compare_at_price_max":199900,"compare_at_price_varies":false,"variants":[{"id":43176648048867,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEMINI-II-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"sE Electronics Dual Tube Cardioid Condenser Microphone with Shockmount and Case","public_title":null,"options":["Default Title"],"price":159900,"weight":9072,"compare_at_price":199900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850426001330","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/GEMINI-II-U-1.jpg?v=1659135088"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/GEMINI-II-U-1.jpg?v=1659135088","options":["Title"],"media":[{"alt":null,"id":30499052159203,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/GEMINI-II-U-1.jpg?v=1659135088"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/GEMINI-II-U-1.jpg?v=1659135088","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDual Tube design, input tube is a 12AX7 and output tube is a 12AU7. Bass cut filter and -10db pad. Hand crafted true condenser capsule. 35mm gold\/mylar diaphragm. Cardioid directional pattern. 20hz to 20khz frequency range with 35.48mV\/Pa (-29db) sensitivity. 135\/145 Max SPL and 75 db signal to noise ratio. 19 db self-noise, 150hz pass filter switch, an -10db preattenuation pad. Dedicated power supply unit included The Gemini Concept: Dual-Tube Design -Most microphones use a transformer to optimize the mic's output impedance and couple the mic to the mic preamplifier. With the Gemini II, this optimization is accomplished with a second vacuum tube, negating any high frequency roll off typically incurred with a transformer. -This provides the Gemini II with a sparkling, pristine high-end typically only found in the most expensive solid-state microphones, while maintaining the rich, thick tonality of a tube mic. Not just for vocals, the bass cut filter and -10dB pad make the Gemini useful for loud and heavy sources like drum room mics and booming timpani. Handcrafted Capsule \u0026amp; Larger-Than-Life Sound: -The Gemini II has a 1 1\/4” capsule that is handcrafted and individually tuned in our very own factory. -Thanks to a larger-than-life capsule, true condenser technology and ultra-precision parts, the Gemini II delivers a massive sound right out of the box. In addition, the Gemini II’s hand-made metal housing and gold-sputtered diaphragms, ensure maximum reliability in all sonic settings.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 35mm Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 40 mV\/Pa (-28 dB)\u003cbr\u003e\n•\tMax SPL: 135\/145 dB (0\/-10 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tSelf-Noise: 13 dB(A)\u003cbr\u003e\n•\tPass Filter Switch: 150 Hz\u003cbr\u003e\n•\tPreattenuation Pad: -10 dB\u003cbr\u003e\n•\tPower Requirement: Dedicated PSU (included)\u003cbr\u003e\n•\tWeight (mic): 1180g \/ 41.60oz\u003cbr\u003e\n•\tWeight (PSU): 1970g \/ 69.50oz\u003cbr\u003e\n•\tTube complement: 1x 12AX7\/ECC83, 1x 12AU7\/ECC82\u003cbr\u003e\n•\tConnector: XLR3F from PSU\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Factory Matched Pair of Omni Pattern Capsules for sE8 Microphones

Install this handcrafted, individually tuned omnidirectional capsule on your sE Electronic sE8 small-diaphragm condenser microphone, and it will be well-equipped to tackle orchestras, ensembles, and...

Sale

Install this handcrafted, individually tuned omnidirectional capsule on your sE Electronic sE8 small-diaphragm condenser microphone,...

SKU: SE8-OMNI-CAP-PAIR-U

Availability: Out Stock

Sold Out

Add to cart

Quick View {"id":7800556650723,"title":"sE Electronics Factory Matched Pair of Omni Pattern Capsules for sE8 Microphones","handle":"se-electronics-factory-matched-pair-of-omni-pattern-capsules-for-se8-microphones-se8-omni-cap-pair-u","description":"\u003cp\u003eInstall this handcrafted, individually tuned omnidirectional capsule on your sE Electronic sE8 small-diaphragm condenser microphone, and it will be well-equipped to tackle orchestras, ensembles, and choirs, along with solo instruments and vocals. The sE8’s has detailed sound, superior transient response, and impressively low self-noise, and adding the sE8 omnidirectional mic capsule to the mix transforms it into a first-call workhorse for any studio.\u003c\/p\u003e \n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tHandcrafted gold-sputtered small-diaphragm capsule\u003cbr\u003e\n•\tAdds flexibility to your sE8 small-diaphragm condenser microphone\u003cbr\u003e\n•\tIndividually tuned for optimal sound\u003cbr\u003e\n•\tOmnidirectional polar pattern is ideal for orchestras, ensembles, and choirs, along with solo instruments and vocals\u003c\/p\u003e","published_at":"2022-07-29T15:51:23-07:00","created_at":"2022-07-29T15:51:24-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":20900,"price_min":20900,"price_max":20900,"available":false,"price_varies":false,"compare_at_price":27900,"compare_at_price_min":27900,"compare_at_price_max":27900,"compare_at_price_varies":false,"variants":[{"id":43176647852259,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE8-OMNI-CAP-PAIR-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"sE Electronics Factory Matched Pair of Omni Pattern Capsules for sE8 Microphones","public_title":null,"options":["Default Title"],"price":20900,"weight":454,"compare_at_price":27900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011850","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-OMNI-CAP-PAIR-U-1.jpg?v=1659135084"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-OMNI-CAP-PAIR-U-1.jpg?v=1659135084","options":["Title"],"media":[{"alt":null,"id":30499051438307,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-OMNI-CAP-PAIR-U-1.jpg?v=1659135084"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-OMNI-CAP-PAIR-U-1.jpg?v=1659135084","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eInstall this handcrafted, individually tuned omnidirectional capsule on your sE Electronic sE8 small-diaphragm condenser microphone, and it will be well-equipped to tackle orchestras, ensembles, and choirs, along with solo instruments and vocals. The sE8’s has detailed sound, superior transient response, and impressively low self-noise, and adding the sE8 omnidirectional mic capsule to the mix transforms it into a first-call workhorse for any studio.\u003c\/p\u003e \n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tHandcrafted gold-sputtered small-diaphragm capsule\u003cbr\u003e\n•\tAdds flexibility to your sE8 small-diaphragm condenser microphone\u003cbr\u003e\n•\tIndividually tuned for optimal sound\u003cbr\u003e\n•\tOmnidirectional polar pattern is ideal for orchestras, ensembles, and choirs, along with solo instruments and vocals\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Factory Matched Pair of sE8 Omni Microphones & Mounting and Case

Based on the highly acclaimed sE8 cardioid pencil condenser, sE proudly offers an omnidirectional option. Featuring the very same, sophisticated capsule backplate design and true...

Sale

Based on the highly acclaimed sE8 cardioid pencil condenser, sE proudly offers an omnidirectional option....

SKU: SE8-OMNI-PAIR-U

Availability: In Stock

$599.00 $519.00

Quick View {"id":7800556552419,"title":"sE Electronics Factory Matched Pair of sE8 Omni Microphones \u0026 Mounting and Case","handle":"se-electronics-factory-matched-pair-of-se8-omni-microphones-mounting-and-case-se8-omni-pair-u","description":"\u003cp\u003eBased on the highly acclaimed sE8 cardioid pencil condenser, sE proudly offers an omnidirectional option. Featuring the very same, sophisticated capsule backplate design and true condenser technology, the sE8 omni provides an authentic and transparent sound quality second to none. Every pair is hand-crafted and carefully selected in our own factory to ensure the best possible performance. With the lowest noise and highest SPL capability in its class, the sE8 omni is the perfect choice for demanding applications like recording orchestras, ensembles, and choirs but equally good for solo instruments, vocals, and percussion.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted Small-Diaphragm True Condenser\u003cbr\u003e\n•\tPolar Pattern: Omnidirectional\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 20 mV\/Pa (-34 dBV)\u003cbr\u003e\n•\tMax SPL: 141 \/ 151 \/ 161 dBSPL (0\/10\/20 dB Attenuation pad)\u003cbr\u003e\n•\tEquivalent noise level: 15 dB(A)\u003cbr\u003e\n•\tDynamic range: 126 \/ 136 \/ 146 dB (0\/10\/20 dB Attenuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 79 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 110 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 2.7 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDiameter: 23 mm (0.91 in.),\u003c\/p\u003e","published_at":"2022-07-29T15:51:21-07:00","created_at":"2022-07-29T15:51:22-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":51900,"price_min":51900,"price_max":51900,"available":true,"price_varies":false,"compare_at_price":59900,"compare_at_price_min":59900,"compare_at_price_max":59900,"compare_at_price_varies":false,"variants":[{"id":43176647786723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE8-OMNI-PAIR-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Factory Matched Pair of sE8 Omni Microphones \u0026 Mounting and Case","public_title":null,"options":["Default Title"],"price":51900,"weight":454,"compare_at_price":59900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011843","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-OMNI-PAIR-U-1.jpg?v=1659135082"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-OMNI-PAIR-U-1.jpg?v=1659135082","options":["Title"],"media":[{"alt":null,"id":30499051176163,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-OMNI-PAIR-U-1.jpg?v=1659135082"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-OMNI-PAIR-U-1.jpg?v=1659135082","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBased on the highly acclaimed sE8 cardioid pencil condenser, sE proudly offers an omnidirectional option. Featuring the very same, sophisticated capsule backplate design and true condenser technology, the sE8 omni provides an authentic and transparent sound quality second to none. Every pair is hand-crafted and carefully selected in our own factory to ensure the best possible performance. With the lowest noise and highest SPL capability in its class, the sE8 omni is the perfect choice for demanding applications like recording orchestras, ensembles, and choirs but equally good for solo instruments, vocals, and percussion.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted Small-Diaphragm True Condenser\u003cbr\u003e\n•\tPolar Pattern: Omnidirectional\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 20 mV\/Pa (-34 dBV)\u003cbr\u003e\n•\tMax SPL: 141 \/ 151 \/ 161 dBSPL (0\/10\/20 dB Attenuation pad)\u003cbr\u003e\n•\tEquivalent noise level: 15 dB(A)\u003cbr\u003e\n•\tDynamic range: 126 \/ 136 \/ 146 dB (0\/10\/20 dB Attenuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 79 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 110 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 2.7 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDiameter: 23 mm (0.91 in.),\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Multi Pattern Large Diaphragm Vintage Microphone with Shockmount

Hand-Crafted Capsules: -As with all sE mics, the 4400a's back-to-back brass-ringed capsules are hand-built and hand-tuned by our skilled technicians, just like any fine musical...

Sale

Hand-Crafted Capsules: -As with all sE mics, the 4400a's back-to-back brass-ringed capsules are hand-built and...

SKU: SE4400A-U

Availability: Out Stock

Sold Out

Add to cart

Quick View {"id":7800556060899,"title":"sE Electronics Multi Pattern Large Diaphragm Vintage Microphone with Shockmount","handle":"se-electronics-multi-pattern-large-diaphragm-vintage-microphone-with-shockmount-se4400a-u","description":"\u003cp\u003eHand-Crafted Capsules: -As with all sE mics, the 4400a's back-to-back brass-ringed capsules are hand-built and hand-tuned by our skilled technicians, just like any fine musical instrument. Custom Shock mount + Chassis: -The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around, and used flat against a drumhead or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3\/4\" thick, it fits neatly in the palm of your hand, but is built to take a beating on the road. Non-Reflective Paint: -The mic has a unique, black, non-reflective, non-marking, rubberized finish which is ideal for live stage, theatre, TV, and broadcast applications which require lighting.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 32mm Twin Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid, Hyper Cardioid, Omni, Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 50 Ohms\u003cbr\u003e\n•\tSensitivity: 25.12 mV\/Pa (-32 dB)\u003cbr\u003e\n•\tMax SPL: 122\/132\/142 dB (0\/-10\/-20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB\u003cbr\u003e\n•\tSelf-Noise: 16 dB(A)\u003cbr\u003e\n•\tPass Filter Switch: 60\/120 Hz\u003cbr\u003e\n•\tPreattenuation Pad: -10\/-20 dB\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 280g \/ 9.88oz\u003c\/p\u003e","published_at":"2022-07-29T15:51:05-07:00","created_at":"2022-07-29T15:51:07-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":49900,"price_min":49900,"price_max":49900,"available":false,"price_varies":false,"compare_at_price":59900,"compare_at_price_min":59900,"compare_at_price_max":59900,"compare_at_price_varies":false,"variants":[{"id":43176646312163,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE4400A-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"sE Electronics Multi Pattern Large Diaphragm Vintage Microphone with Shockmount","public_title":null,"options":["Default Title"],"price":49900,"weight":907,"compare_at_price":59900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850426001453","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE4400A-U-1.jpg?v=1659135067"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE4400A-U-1.jpg?v=1659135067","options":["Title"],"media":[{"alt":null,"id":30499049603299,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE4400A-U-1.jpg?v=1659135067"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE4400A-U-1.jpg?v=1659135067","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHand-Crafted Capsules: -As with all sE mics, the 4400a's back-to-back brass-ringed capsules are hand-built and hand-tuned by our skilled technicians, just like any fine musical instrument. Custom Shock mount + Chassis: -The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around, and used flat against a drumhead or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3\/4\" thick, it fits neatly in the palm of your hand, but is built to take a beating on the road. Non-Reflective Paint: -The mic has a unique, black, non-reflective, non-marking, rubberized finish which is ideal for live stage, theatre, TV, and broadcast applications which require lighting.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted True Condenser\u003cbr\u003e\n•\tDiaphragm: 32mm Twin Gold\/Mylar\u003cbr\u003e\n•\tDirectional Pattern: Cardioid, Hyper Cardioid, Omni, Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 50 Ohms\u003cbr\u003e\n•\tSensitivity: 25.12 mV\/Pa (-32 dB)\u003cbr\u003e\n•\tMax SPL: 122\/132\/142 dB (0\/-10\/-20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB\u003cbr\u003e\n•\tSelf-Noise: 16 dB(A)\u003cbr\u003e\n•\tPass Filter Switch: 60\/120 Hz\u003cbr\u003e\n•\tPreattenuation Pad: -10\/-20 dB\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 280g \/ 9.88oz\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Multi Pattern Large Diaphragm Condenser Mic & Shockmount & Filter

Handcrafted 1" True Condenser Capsule: -Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in...

Sale

Handcrafted 1" True Condenser Capsule: -Built like the world’s finest musical instruments, every capsule is...

SKU: SE2300-U

Availability: In Stock

$499.00 $399.00

Quick View {"id":7800555995363,"title":"sE Electronics Multi Pattern Large Diaphragm Condenser Mic \u0026 Shockmount \u0026 Filter","handle":"se-electronics-multi-pattern-large-diaphragm-condenser-mic-shockmount-filter-se2300-u","description":"\u003cp\u003eHandcrafted 1\" True Condenser Capsule: -Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in Shanghai - and unlike other microphones with backplate or electret designs, the sE2300 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect. Three Selectable Polar Patterns: -The 3-position Pattern Switch is located on the rear side of the microphone and allows the sE2300’s polar pattern to be changed from omnidirectional to cardioid to figure-eight. This allows for great control over the balance between direct and ambient sound. Traditional Class-A Electronic Design: -Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2300’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances. Two Switchable Attenuation Levels \u0026amp; Low-Cut Filters: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -Selectable at either 80Hz or 160Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. Custom-Built Output Transformer -Reviving the spirit of classic studio microphones, the sE2300’s custom transformer provides superb depth \u0026amp; weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-crafted 1\" True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid, Omni-directional, Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 24 mV\/Pa (-32.5 dBV)\u003cbr\u003e\n•\tMax SPL: 126 \/ 136 \/ 146 dB (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 9 dB(A)\u003cbr\u003e\n•\tDynamic range: 117 \/ 127 \/ 137 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 85 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 40 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 4.8 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)\u003cbr\u003e\n•\tWeight: 611 g (21.55 oz.)\u003c\/p\u003e","published_at":"2022-07-29T15:51:02-07:00","created_at":"2022-07-29T15:51:03-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":39900,"price_min":39900,"price_max":39900,"available":true,"price_varies":false,"compare_at_price":49900,"compare_at_price_min":49900,"compare_at_price_max":49900,"compare_at_price_varies":false,"variants":[{"id":43176646213859,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE2300-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Multi Pattern Large Diaphragm Condenser Mic \u0026 Shockmount \u0026 Filter","public_title":null,"options":["Default Title"],"price":39900,"weight":907,"compare_at_price":49900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011522","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2300-U-1.jpg?v=1659135064"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2300-U-1.jpg?v=1659135064","options":["Title"],"media":[{"alt":null,"id":30499049111779,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2300-U-1.jpg?v=1659135064"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2300-U-1.jpg?v=1659135064","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHandcrafted 1\" True Condenser Capsule: -Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in Shanghai - and unlike other microphones with backplate or electret designs, the sE2300 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect. Three Selectable Polar Patterns: -The 3-position Pattern Switch is located on the rear side of the microphone and allows the sE2300’s polar pattern to be changed from omnidirectional to cardioid to figure-eight. This allows for great control over the balance between direct and ambient sound. Traditional Class-A Electronic Design: -Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2300’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances. Two Switchable Attenuation Levels \u0026amp; Low-Cut Filters: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -Selectable at either 80Hz or 160Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. Custom-Built Output Transformer -Reviving the spirit of classic studio microphones, the sE2300’s custom transformer provides superb depth \u0026amp; weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-crafted 1\" True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid, Omni-directional, Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 24 mV\/Pa (-32.5 dBV)\u003cbr\u003e\n•\tMax SPL: 126 \/ 136 \/ 146 dB (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 9 dB(A)\u003cbr\u003e\n•\tDynamic range: 117 \/ 127 \/ 137 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 85 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 40 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 4.8 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)\u003cbr\u003e\n•\tWeight: 611 g (21.55 oz.)\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Factory Matched Pair of Cardioid Pattern Capsules for sE8 Mic

This pair of sE Electronics sE8 Cardioid Microphone Capsules helps makes your omnidirectional sE8 microphones more versatile. The factory-matched condenser microphone capsule pair offers a...

Sale

This pair of sE Electronics sE8 Cardioid Microphone Capsules helps makes your omnidirectional sE8 microphones...

SKU: SE8-CARD-CAP-PAIR-U

Availability: In Stock

$279.00 $209.00

Quick View {"id":7800556716259,"title":"sE Electronics Factory Matched Pair of Cardioid Pattern Capsules for sE8 Mic","handle":"se-electronics-factory-matched-pair-of-cardioid-pattern-capsules-for-se8-mic-se8-card-cap-pair-u","description":"\u003cp\u003eThis pair of sE Electronics sE8 Cardioid Microphone Capsules helps makes your omnidirectional sE8 microphones more versatile. The factory-matched condenser microphone capsule pair offers a detailed and balanced sound with quick and accurate transient sound. The capsules come equipped with two switchable pre-attenuation pads (-10dB and -20dB) for even greater dynamic range. And since they easily screw onto the microphone body, you can go from having a stereo pair of Omnis to a matched pair of cardioids in less than a minute. Purchase an sE Electronics sE8 Cardioid Microphone Capsule Pair and open the door to maximum recording flexibility.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tHandcrafted gold-sputtered small-diaphragm capsule\u003cbr\u003e\n•\tAdds extra versatility to your sE8 small-diaphragm condenser microphone\u003cbr\u003e\n•\tSwitchable pre-attenuation pads (-10dB and -20dB) allow for greater dynamic range\u003cbr\u003e\n•\tIndividually tuned and factory matched for optimal sound\u003cbr\u003e\n•\tCardioid polar pattern is ideal for acoustic guitar, drum overheads, and much more\u003c\/p\u003e","published_at":"2022-07-29T15:51:24-07:00","created_at":"2022-07-29T15:51:26-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":20900,"price_min":20900,"price_max":20900,"available":true,"price_varies":false,"compare_at_price":27900,"compare_at_price_min":27900,"compare_at_price_max":27900,"compare_at_price_varies":false,"variants":[{"id":43176647983331,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE8-CARD-CAP-PAIR-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Factory Matched Pair of Cardioid Pattern Capsules for sE8 Mic","public_title":null,"options":["Default Title"],"price":20900,"weight":454,"compare_at_price":27900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011935","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-CARD-CAP-PAIR-U-1.jpg?v=1659135086"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-CARD-CAP-PAIR-U-1.jpg?v=1659135086","options":["Title"],"media":[{"alt":null,"id":30499052060899,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-CARD-CAP-PAIR-U-1.jpg?v=1659135086"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-CARD-CAP-PAIR-U-1.jpg?v=1659135086","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis pair of sE Electronics sE8 Cardioid Microphone Capsules helps makes your omnidirectional sE8 microphones more versatile. The factory-matched condenser microphone capsule pair offers a detailed and balanced sound with quick and accurate transient sound. The capsules come equipped with two switchable pre-attenuation pads (-10dB and -20dB) for even greater dynamic range. And since they easily screw onto the microphone body, you can go from having a stereo pair of Omnis to a matched pair of cardioids in less than a minute. Purchase an sE Electronics sE8 Cardioid Microphone Capsule Pair and open the door to maximum recording flexibility.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tHandcrafted gold-sputtered small-diaphragm capsule\u003cbr\u003e\n•\tAdds extra versatility to your sE8 small-diaphragm condenser microphone\u003cbr\u003e\n•\tSwitchable pre-attenuation pads (-10dB and -20dB) allow for greater dynamic range\u003cbr\u003e\n•\tIndividually tuned and factory matched for optimal sound\u003cbr\u003e\n•\tCardioid polar pattern is ideal for acoustic guitar, drum overheads, and much more\u003c\/p\u003e"}

Condenser Microphones

sE Electronics X1 Series Condenser Microphone and Clip in White & Black

All-Metal Housing & Premium Finish: -Unlike the cheaply constructed bodies of some other "entry-level" microphones, the X1 A's all-metal chassis provides efficient rejection of any...

Sale

All-Metal Housing & Premium Finish: -Unlike the cheaply constructed bodies of some other "entry-level" microphones,...

SKU: X1-A-WHT-U

Availability: In Stock

$149.00 $99.00

Quick View {"id":7800555634915,"title":"sE Electronics X1 Series Condenser Microphone and Clip in White \u0026 Black","handle":"se-electronics-x1-series-condenser-microphone-and-clip-in-white-black-x1-a-wht-u","description":"\u003cp\u003eAll-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other \"entry-level\" microphones, the X1 A's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come. Integrated Windscreen: -Eliminates the need for an external pop filter and provides an extra layer of safety and security for the all-important capsule. Completely New Acoustic Design: -The X1 A's new condenser capsule design is a work of art, delivering stellar sonic performance on any source with incredible speed, accuracy, and well-balanced frequency response. -The electronics have also undergone a complete overhaul and exhibit better specifications and sound - on and off the test bench - than any other microphone in its class. Attenuation \u0026amp; Low-Cut Switches: -The -20 dB pad switch on the left provides extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -On the right, the 100 Hz low-cut switch helps eliminate low-frequency rumble or footfall noise and compensates for excessive bass with close-mic techniques (proximity effect). Gold-Plated XLR Connector: -Ensures loss-free, reliable signal connection for years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 2\/3\" Permanently Biased Condenser\u003cbr\u003e\n•\tDirectional Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tSensitivity: 20 mV\/Pa (-34 dB)\u003cbr\u003e\n•\tMax SPL: 130 \/ 150 dB (0 \/ 20 dB pad, (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB(A)\u003cbr\u003e\n•\tEquivalent Noise Level: 16 dB(A)\u003cbr\u003e\n•\tDynamic Range: 114 \/ 134 dB (0 \/ 20 dB pad)\u003cbr\u003e\n•\tLow Cut Filter: 100 Hz, 6 dB\/oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR\u003cbr\u003e\n•\tPower requirement: 48V phantom according to IEC 61938\u003cbr\u003e\n•\tRecommended Load Impedance: \u0026gt;1K Ohms\u003cbr\u003e\n•\tCurrent Consumption: 4.0 mA\u003cbr\u003e\n•\tDiameter: 58 mm (2.28 in.) \u003cbr\u003e\n•\tLength: 169 mm (6.65 in.)\u003cbr\u003e\n•\tWeight: 390 g \/ 13.8 oz\u003c\/p\u003e","published_at":"2022-07-29T15:50:53-07:00","created_at":"2022-07-29T15:50:55-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":9900,"price_min":9900,"price_max":9900,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":43176645918947,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X1-A-WHT-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics X1 Series Condenser Microphone and Clip in White \u0026 Black","public_title":null,"options":["Default Title"],"price":9900,"weight":454,"compare_at_price":14900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011997","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-WHT-U-1.jpg?v=1659135055"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-WHT-U-1.jpg?v=1659135055","options":["Title"],"media":[{"alt":null,"id":30499047604451,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-WHT-U-1.jpg?v=1659135055"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-WHT-U-1.jpg?v=1659135055","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAll-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other \"entry-level\" microphones, the X1 A's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come. Integrated Windscreen: -Eliminates the need for an external pop filter and provides an extra layer of safety and security for the all-important capsule. Completely New Acoustic Design: -The X1 A's new condenser capsule design is a work of art, delivering stellar sonic performance on any source with incredible speed, accuracy, and well-balanced frequency response. -The electronics have also undergone a complete overhaul and exhibit better specifications and sound - on and off the test bench - than any other microphone in its class. Attenuation \u0026amp; Low-Cut Switches: -The -20 dB pad switch on the left provides extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -On the right, the 100 Hz low-cut switch helps eliminate low-frequency rumble or footfall noise and compensates for excessive bass with close-mic techniques (proximity effect). Gold-Plated XLR Connector: -Ensures loss-free, reliable signal connection for years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 2\/3\" Permanently Biased Condenser\u003cbr\u003e\n•\tDirectional Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tSensitivity: 20 mV\/Pa (-34 dB)\u003cbr\u003e\n•\tMax SPL: 130 \/ 150 dB (0 \/ 20 dB pad, (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB(A)\u003cbr\u003e\n•\tEquivalent Noise Level: 16 dB(A)\u003cbr\u003e\n•\tDynamic Range: 114 \/ 134 dB (0 \/ 20 dB pad)\u003cbr\u003e\n•\tLow Cut Filter: 100 Hz, 6 dB\/oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR\u003cbr\u003e\n•\tPower requirement: 48V phantom according to IEC 61938\u003cbr\u003e\n•\tRecommended Load Impedance: \u0026gt;1K Ohms\u003cbr\u003e\n•\tCurrent Consumption: 4.0 mA\u003cbr\u003e\n•\tDiameter: 58 mm (2.28 in.) \u003cbr\u003e\n•\tLength: 169 mm (6.65 in.)\u003cbr\u003e\n•\tWeight: 390 g \/ 13.8 oz\u003c\/p\u003e"}

Condenser Microphones

sE Electronics X1 Series Condenser Microphone and Clip

All-Metal Housing & Premium Finish: -Unlike the cheaply constructed bodies of some other "entry-level" microphones, the X1 A's all-metal chassis provides efficient rejection of any...

Sale

All-Metal Housing & Premium Finish: -Unlike the cheaply constructed bodies of some other "entry-level" microphones,...

SKU: X1-A-U

Availability: In Stock

$129.00 $99.00

Quick View {"id":7800555569379,"title":"sE Electronics X1 Series Condenser Microphone and Clip","handle":"se-electronics-x1-series-condenser-microphone-and-clip-x1-a-u","description":"\u003cp\u003eAll-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other \"entry-level\" microphones, the X1 A's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come. Integrated Windscreen: -Eliminates the need for an external pop filter and provides an extra layer of safety and security for the all-important capsule. Completely New Acoustic Design: -The X1 A's new condenser capsule design is a work of art, delivering stellar sonic performance on any source with incredible speed, accuracy, and well-balanced frequency response. -The electronics have also undergone a complete overhaul and exhibit better specifications and sound - on and off the test bench - than any other microphone in its class. Attenuation \u0026amp; Low-Cut Switches: -The -20 dB pad switch on the left provides extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -On the right, the 100 Hz low-cut switch helps eliminate low-frequency rumble or footfall noise and compensates for excessive bass with close-mic techniques (proximity effect). Gold-Plated XLR Connector: -Ensures loss-free, reliable signal connection for years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 2\/3\" Permanently Biased Condenser\u003cbr\u003e\n•\tDirectional Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tSensitivity: 20 mV\/Pa (-34 dB)\u003cbr\u003e\n•\tMax SPL: 130 \/ 150 dB (0 \/ 20 dB pad, (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB(A)\u003cbr\u003e\n•\tEquivalent Noise Level: 16 dB(A)\u003cbr\u003e\n•\tDynamic Range: 114 \/ 134 dB (0 \/ 20 dB pad)\u003cbr\u003e\n•\tLow Cut Filter: 100 Hz, 6 dB\/oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR\u003cbr\u003e\n•\tPower requirement: 48V phantom according to IEC 61938\u003cbr\u003e\n•\tRecommended Load Impedance: \u0026gt;1K Ohms\u003cbr\u003e\n•\tCurrent Consumption: 4.0 mA\u003cbr\u003e\n•\tDiameter: 58 mm (2.28 in.) \u003cbr\u003e\n•\tLength: 169 mm (6.65 in.)\u003cbr\u003e\n•\tWeight: 390 g \/ 13.8 oz\u003c\/p\u003e","published_at":"2022-07-29T15:50:52-07:00","created_at":"2022-07-29T15:50:53-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":9900,"price_min":9900,"price_max":9900,"available":true,"price_varies":false,"compare_at_price":12900,"compare_at_price_min":12900,"compare_at_price_max":12900,"compare_at_price_varies":false,"variants":[{"id":43176645853411,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X1-A-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics X1 Series Condenser Microphone and Clip","public_title":null,"options":["Default Title"],"price":9900,"weight":454,"compare_at_price":12900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011171","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-U-1.jpg?v=1659135053"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-U-1.jpg?v=1659135053","options":["Title"],"media":[{"alt":null,"id":30499047342307,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-U-1.jpg?v=1659135053"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-U-1.jpg?v=1659135053","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAll-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other \"entry-level\" microphones, the X1 A's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come. Integrated Windscreen: -Eliminates the need for an external pop filter and provides an extra layer of safety and security for the all-important capsule. Completely New Acoustic Design: -The X1 A's new condenser capsule design is a work of art, delivering stellar sonic performance on any source with incredible speed, accuracy, and well-balanced frequency response. -The electronics have also undergone a complete overhaul and exhibit better specifications and sound - on and off the test bench - than any other microphone in its class. Attenuation \u0026amp; Low-Cut Switches: -The -20 dB pad switch on the left provides extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -On the right, the 100 Hz low-cut switch helps eliminate low-frequency rumble or footfall noise and compensates for excessive bass with close-mic techniques (proximity effect). Gold-Plated XLR Connector: -Ensures loss-free, reliable signal connection for years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 2\/3\" Permanently Biased Condenser\u003cbr\u003e\n•\tDirectional Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tSensitivity: 20 mV\/Pa (-34 dB)\u003cbr\u003e\n•\tMax SPL: 130 \/ 150 dB (0 \/ 20 dB pad, (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB(A)\u003cbr\u003e\n•\tEquivalent Noise Level: 16 dB(A)\u003cbr\u003e\n•\tDynamic Range: 114 \/ 134 dB (0 \/ 20 dB pad)\u003cbr\u003e\n•\tLow Cut Filter: 100 Hz, 6 dB\/oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR\u003cbr\u003e\n•\tPower requirement: 48V phantom according to IEC 61938\u003cbr\u003e\n•\tRecommended Load Impedance: \u0026gt;1K Ohms\u003cbr\u003e\n•\tCurrent Consumption: 4.0 mA\u003cbr\u003e\n•\tDiameter: 58 mm (2.28 in.) \u003cbr\u003e\n•\tLength: 169 mm (6.65 in.)\u003cbr\u003e\n•\tWeight: 390 g \/ 13.8 oz\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Factory Matched Pair of sE8 Microphones with Mounting and Case

As with all our factory-matched pairs, every mic ending up in a sE8 Stereo Pair configuration is hand-selected from hundreds of individual microphones. This ensures...

Sale

As with all our factory-matched pairs, every mic ending up in a sE8 Stereo Pair...

SKU: SE8-PAIR-U

Availability: In Stock

$599.00 $519.00

Quick View {"id":7800556486883,"title":"sE Electronics Factory Matched Pair of sE8 Microphones with Mounting and Case","handle":"se-electronics-factory-matched-pair-of-se8-microphones-with-mounting-and-case-se8-pair-u","description":"\u003cp\u003eAs with all our factory-matched pairs, every mic ending up in a sE8 Stereo Pair configuration is hand-selected from hundreds of individual microphones. This ensures identical performance and the highest possible mic-to-mic consistency, so you can rest assured that your stereo image will be as clear \u0026amp; accurate as possible. There are many things to expect when buying these as a pair. Handcrafted True Condenser Capsule: -Gold-sputtered diaphragms ensure maximum reliability -Every capsule is handcrafted and individually tuned in our very own factory -Ultra-precision electrode design optimized for superb linearity and natural sonics -Ultra-thin 3 micron gold-sputtered diaphragm for superior transients -Newly-developed backplate design provides smooth, natural sound \u0026amp; truly consistent off-axis response -Sophisticated acoustic design with precision components -Avoids coloration in demanding applications The Quietest Pencil Mic In Its Class: -Sophisticated electronic design provides extremely low noise without the use of integrated circuits -Transformerless design for excellent transparency and clarity -Proven Class-A circuitry ensures a high dynamic range without distortion and brilliant transient response Two Switchable Pre-Attenuation Pads: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more. Two switchable low-cut filters: -Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -Unlike the cheaply constructed bodies of some small-capsule microphones, the sE8's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish and gold-plated XLR connector ensures a great look and a loss-free, reliable signal connection for years to come. -The sE8 also comes standard with a newly designed mic clip that will securely attach it to any mic stand.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted Small-Diaphragm True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 25 mV\/Pa (-32 dBV)\u003cbr\u003e\n•\tMax SPL: 139 \/ 149 \/ 159 dBSPL (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 13 dB(A)\u003cbr\u003e\n•\tDynamic range: 126 \/ 136 \/ 146 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 110 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 2.7 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter- 23mm (0.91 in), Length- 120mm (4.72 in)\u003c\/p\u003e","published_at":"2022-07-29T15:51:18-07:00","created_at":"2022-07-29T15:51:20-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":51900,"price_min":51900,"price_max":51900,"available":true,"price_varies":false,"compare_at_price":59900,"compare_at_price_min":59900,"compare_at_price_max":59900,"compare_at_price_varies":false,"variants":[{"id":43176647721187,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE8-PAIR-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Factory Matched Pair of sE8 Microphones with Mounting and Case","public_title":null,"options":["Default Title"],"price":51900,"weight":454,"compare_at_price":59900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011225","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-PAIR-U-1.jpg?v=1659135080"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-PAIR-U-1.jpg?v=1659135080","options":["Title"],"media":[{"alt":null,"id":30499050848483,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-PAIR-U-1.jpg?v=1659135080"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-PAIR-U-1.jpg?v=1659135080","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAs with all our factory-matched pairs, every mic ending up in a sE8 Stereo Pair configuration is hand-selected from hundreds of individual microphones. This ensures identical performance and the highest possible mic-to-mic consistency, so you can rest assured that your stereo image will be as clear \u0026amp; accurate as possible. There are many things to expect when buying these as a pair. Handcrafted True Condenser Capsule: -Gold-sputtered diaphragms ensure maximum reliability -Every capsule is handcrafted and individually tuned in our very own factory -Ultra-precision electrode design optimized for superb linearity and natural sonics -Ultra-thin 3 micron gold-sputtered diaphragm for superior transients -Newly-developed backplate design provides smooth, natural sound \u0026amp; truly consistent off-axis response -Sophisticated acoustic design with precision components -Avoids coloration in demanding applications The Quietest Pencil Mic In Its Class: -Sophisticated electronic design provides extremely low noise without the use of integrated circuits -Transformerless design for excellent transparency and clarity -Proven Class-A circuitry ensures a high dynamic range without distortion and brilliant transient response Two Switchable Pre-Attenuation Pads: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more. Two switchable low-cut filters: -Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -Unlike the cheaply constructed bodies of some small-capsule microphones, the sE8's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish and gold-plated XLR connector ensures a great look and a loss-free, reliable signal connection for years to come. -The sE8 also comes standard with a newly designed mic clip that will securely attach it to any mic stand.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted Small-Diaphragm True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 25 mV\/Pa (-32 dBV)\u003cbr\u003e\n•\tMax SPL: 139 \/ 149 \/ 159 dBSPL (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 13 dB(A)\u003cbr\u003e\n•\tDynamic range: 126 \/ 136 \/ 146 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 110 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 2.7 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter- 23mm (0.91 in), Length- 120mm (4.72 in)\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Small Diaphragm Cardioid Condenser Mic & Gold Sputtered Diaphragm

Handcrafted True Condenser Capsule: -Gold-sputtered diaphragms ensure maximum reliability -Every capsule is handcrafted and individually tuned in our very own factory -Ultra-precision electrode design optimized...

Sale

Handcrafted True Condenser Capsule: -Gold-sputtered diaphragms ensure maximum reliability -Every capsule is handcrafted and individually...

SKU: SE8-U

Availability: Out Stock

Sold Out

Add to cart

Quick View {"id":7800556421347,"title":"sE Electronics Small Diaphragm Cardioid Condenser Mic \u0026 Gold Sputtered Diaphragm","handle":"se-electronics-small-diaphragm-cardioid-condenser-mic-gold-sputtered-diaphragm-se8-u","description":"\u003cp\u003eHandcrafted True Condenser Capsule: -Gold-sputtered diaphragms ensure maximum reliability -Every capsule is handcrafted and individually tuned in our very own factory -Ultra-precision electrode design optimized for superb linearity and natural sonics -Ultra-thin 3 micron gold-sputtered diaphragm for superior transients -Newly-developed backplate design provides smooth, natural sound \u0026amp; truly consistent off-axis response -Sophisticated acoustic design with precision components -Avoids coloration in demanding applications The Quietest Pencil Mic In Its Class: -Sophisticated electronic design provides extremely low noise without the use of integrated circuits -Transformerless design for excellent transparency and clarity -Proven Class-A circuitry ensures a high dynamic range without distortion and brilliant transient response Two Switchable Pre-Attenuation Pads: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more. Two switchable low-cut filters: -Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -Unlike the cheaply constructed bodies of some small-capsule microphones, the sE8's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish and gold-plated XLR connector ensures a great look and a loss-free, reliable signal connection for years to come. -The sE8 also comes standard with a newly designed mic clip that will securely attach it to any mic stand.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted Small-Diaphragm True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 25 mV\/Pa (-32 dBV)\u003cbr\u003e\n•\tMax SPL: 139 \/ 149 \/ 159 dBSPL (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 13 dB(A)\u003cbr\u003e\n•\tDynamic range: 126 \/ 136 \/ 146 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 110 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 2.7 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)\u003cbr\u003e\n•\tWeight: 141 g (4.97 oz.)\u003c\/p\u003e","published_at":"2022-07-29T15:51:16-07:00","created_at":"2022-07-29T15:51:18-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":25900,"price_min":25900,"price_max":25900,"available":false,"price_varies":false,"compare_at_price":29900,"compare_at_price_min":29900,"compare_at_price_max":29900,"compare_at_price_varies":false,"variants":[{"id":43176647655651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE8-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"sE Electronics Small Diaphragm Cardioid Condenser Mic \u0026 Gold Sputtered Diaphragm","public_title":null,"options":["Default Title"],"price":25900,"weight":454,"compare_at_price":29900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011218","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-U-1.jpg?v=1659135078"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-U-1.jpg?v=1659135078","options":["Title"],"media":[{"alt":null,"id":30499050750179,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-U-1.jpg?v=1659135078"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE8-U-1.jpg?v=1659135078","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHandcrafted True Condenser Capsule: -Gold-sputtered diaphragms ensure maximum reliability -Every capsule is handcrafted and individually tuned in our very own factory -Ultra-precision electrode design optimized for superb linearity and natural sonics -Ultra-thin 3 micron gold-sputtered diaphragm for superior transients -Newly-developed backplate design provides smooth, natural sound \u0026amp; truly consistent off-axis response -Sophisticated acoustic design with precision components -Avoids coloration in demanding applications The Quietest Pencil Mic In Its Class: -Sophisticated electronic design provides extremely low noise without the use of integrated circuits -Transformerless design for excellent transparency and clarity -Proven Class-A circuitry ensures a high dynamic range without distortion and brilliant transient response Two Switchable Pre-Attenuation Pads: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more. Two switchable low-cut filters: -Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -Unlike the cheaply constructed bodies of some small-capsule microphones, the sE8's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish and gold-plated XLR connector ensures a great look and a loss-free, reliable signal connection for years to come. -The sE8 also comes standard with a newly designed mic clip that will securely attach it to any mic stand.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted Small-Diaphragm True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 25 mV\/Pa (-32 dBV)\u003cbr\u003e\n•\tMax SPL: 139 \/ 149 \/ 159 dBSPL (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 13 dB(A)\u003cbr\u003e\n•\tDynamic range: 126 \/ 136 \/ 146 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 81 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 110 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 2.7 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)\u003cbr\u003e\n•\tWeight: 141 g (4.97 oz.)\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Factory Matched Pair of sE7 Microphones with Clips

Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds...

Sale

Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of...

SKU: SE7-PAIR-U

Availability: In Stock

$279.00 $219.00

Quick View {"id":7800556388579,"title":"sE Electronics Factory Matched Pair of sE7 Microphones with Clips","handle":"se-electronics-factory-matched-pair-of-se7-microphones-with-clips-se7-pair-u","description":"\u003cp\u003eConvincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance. The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings. With these microphones this is what you should expect and get from them. High-Quality Condenser Capsule: -The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source. The Quietest Pencil Mic in Its Class: -With a very short signal path and state of the art electronics, the sE7 is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth. Switchable Pre-Attenuation Pad: -The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums. Switchable Low-Cut Filter: -The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -The sE7’s all-metal chassis provides efficient rejection of any electrical interference and noise, and its high-quality finish ensures a great look for years to come, and the corrosion-free gold-plated XLR contacts ensure a loss-free, reliable signal connection for years and years and years and... -The sE7 also comes standard with a custom mic clip that will securely attach it to any mic stand via the included thread adapter, plus a windscreen to avoid wind noise.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 1\/2“back-electret condenser capsule\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 19 mV\/Pa (-34.5 dBV)\u003cbr\u003e\n•\tMax SPL: 136 \/ 156 dBSPL (0\/20 dB Attenuation pad)\u003cbr\u003e\n•\tEquivalent noise level: 16 dB(A)\u003cbr\u003e\n•\tDynamic range: 120 \/ 140 dB (0\/20 dB Attenuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB\u003cbr\u003e\n•\tLow-cut filter: 80 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: \u0026lt;200 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 3.0 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)\u003cbr\u003e\n•\tWeight: 128 g (4.52 oz.)\u003c\/p\u003e","published_at":"2022-07-29T15:51:15-07:00","created_at":"2022-07-29T15:51:16-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":21900,"price_min":21900,"price_max":21900,"available":true,"price_varies":false,"compare_at_price":27900,"compare_at_price_min":27900,"compare_at_price_max":27900,"compare_at_price_varies":false,"variants":[{"id":43176647622883,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE7-PAIR-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Factory Matched Pair of sE7 Microphones with Clips","public_title":null,"options":["Default Title"],"price":21900,"weight":454,"compare_at_price":27900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011546","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE7-PAIR-U-1.jpg?v=1659135076"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE7-PAIR-U-1.jpg?v=1659135076","options":["Title"],"media":[{"alt":null,"id":30499050717411,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE7-PAIR-U-1.jpg?v=1659135076"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE7-PAIR-U-1.jpg?v=1659135076","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eConvincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance. The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings. With these microphones this is what you should expect and get from them. High-Quality Condenser Capsule: -The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source. The Quietest Pencil Mic in Its Class: -With a very short signal path and state of the art electronics, the sE7 is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth. Switchable Pre-Attenuation Pad: -The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums. Switchable Low-Cut Filter: -The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -The sE7’s all-metal chassis provides efficient rejection of any electrical interference and noise, and its high-quality finish ensures a great look for years to come, and the corrosion-free gold-plated XLR contacts ensure a loss-free, reliable signal connection for years and years and years and... -The sE7 also comes standard with a custom mic clip that will securely attach it to any mic stand via the included thread adapter, plus a windscreen to avoid wind noise.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 1\/2“back-electret condenser capsule\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 19 mV\/Pa (-34.5 dBV)\u003cbr\u003e\n•\tMax SPL: 136 \/ 156 dBSPL (0\/20 dB Attenuation pad)\u003cbr\u003e\n•\tEquivalent noise level: 16 dB(A)\u003cbr\u003e\n•\tDynamic range: 120 \/ 140 dB (0\/20 dB Attenuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB\u003cbr\u003e\n•\tLow-cut filter: 80 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: \u0026lt;200 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 3.0 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)\u003cbr\u003e\n•\tWeight: 128 g (4.52 oz.)\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Small Diaphragm Cardioid Condenser Microphone with Clip

High-Quality Condenser Capsule: -The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar...

Sale

High-Quality Condenser Capsule: -The sE7’s specialized capsule is designed for natural, balanced sound quality, with...

SKU: SE7-U

Availability: In Stock

$139.00 $109.00

Quick View {"id":7800556323043,"title":"sE Electronics Small Diaphragm Cardioid Condenser Microphone with Clip","handle":"se-electronics-small-diaphragm-cardioid-condenser-microphone-with-clip-se7-u","description":"\u003cp\u003eHigh-Quality Condenser Capsule: -The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source. The Quietest Pencil Mic in Its Class: -With a very short signal path and state of the art electronics, the sE7 is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth. Switchable Pre-Attenuation Pad: -The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums. Switchable Low-Cut Filter: -The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -The sE7’s all-metal chassis provides efficient rejection of any electrical interference and noise, and its high-quality finish ensures a great look for years to come, and the corrosion-free gold-plated XLR contacts ensure a loss-free, reliable signal connection for years and years and years and... -The sE7 also comes standard with a custom mic clip that will securely attach it to any mic stand via the included thread adapter, plus a windscreen to avoid wind noise.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 1\/2“back-electret condenser capsule\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 19 mV\/Pa (-34.5 dBV)\u003cbr\u003e\n•\tMax SPL: 136 \/ 156 dBSPL (0\/20 dB Attenuation pad)\u003cbr\u003e\n•\tEquivalent noise level: 16 dB(A)\u003cbr\u003e\n•\tDynamic range: 120 \/ 140 dB (0\/20 dB Attenuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB\u003cbr\u003e\n•\tLow-cut filter: 80 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: \u0026lt;200 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 3.0 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)\u003cbr\u003e\n•\tWeight: 128 g (4.52 oz.)\u003c\/p\u003e","published_at":"2022-07-29T15:51:13-07:00","created_at":"2022-07-29T15:51:14-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":10900,"price_min":10900,"price_max":10900,"available":true,"price_varies":false,"compare_at_price":13900,"compare_at_price_min":13900,"compare_at_price_max":13900,"compare_at_price_varies":false,"variants":[{"id":43176647557347,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE7-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Small Diaphragm Cardioid Condenser Microphone with Clip","public_title":null,"options":["Default Title"],"price":10900,"weight":454,"compare_at_price":13900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011539","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE7-U-1.jpg?v=1659135074"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE7-U-1.jpg?v=1659135074","options":["Title"],"media":[{"alt":null,"id":30499050455267,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE7-U-1.jpg?v=1659135074"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE7-U-1.jpg?v=1659135074","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHigh-Quality Condenser Capsule: -The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source. The Quietest Pencil Mic in Its Class: -With a very short signal path and state of the art electronics, the sE7 is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth. Switchable Pre-Attenuation Pad: -The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums. Switchable Low-Cut Filter: -The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing with Gold-Plated XLR Connector, Premium Finish \u0026amp; Accessories: -The sE7’s all-metal chassis provides efficient rejection of any electrical interference and noise, and its high-quality finish ensures a great look for years to come, and the corrosion-free gold-plated XLR contacts ensure a loss-free, reliable signal connection for years and years and years and... -The sE7 also comes standard with a custom mic clip that will securely attach it to any mic stand via the included thread adapter, plus a windscreen to avoid wind noise.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 1\/2“back-electret condenser capsule\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 19 mV\/Pa (-34.5 dBV)\u003cbr\u003e\n•\tMax SPL: 136 \/ 156 dBSPL (0\/20 dB Attenuation pad)\u003cbr\u003e\n•\tEquivalent noise level: 16 dB(A)\u003cbr\u003e\n•\tDynamic range: 120 \/ 140 dB (0\/20 dB Attenuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB\u003cbr\u003e\n•\tLow-cut filter: 80 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: \u0026lt;200 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 3.0 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)\u003cbr\u003e\n•\tWeight: 128 g (4.52 oz.)\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Factory Matched Pair of sE4400A with Mounting and Case

When purchased as a pair, the capsules are factory-matched for perfect tolerance, guaranteeing the best possible stereo Image. This configuration also includes a precision stereo...

Sale

When purchased as a pair, the capsules are factory-matched for perfect tolerance, guaranteeing the best...

SKU: SE4400A-PAIR-U

Availability: Out Stock

Sold Out

Add to cart

Quick View {"id":7800556159203,"title":"sE Electronics Factory Matched Pair of sE4400A with Mounting and Case","handle":"se-electronics-factory-matched-pair-of-se4400a-with-mounting-and-case-se4400a-pair-u","description":"\u003cp\u003eWhen purchased as a pair, the capsules are factory-matched for perfect tolerance, guaranteeing the best possible stereo Image. This configuration also includes a precision stereo mounting bar and two of the 4400a's custom shock mounts. The whole setup comes packaged inside a secure flight case.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tA perfectly matched set of amazing multipattern condenser microphones\u003cbr\u003e\n•\tFrequency Response: 20Hz-20KHz\u003cbr\u003e\n•\t10\/20dB pads\u003cbr\u003e\n•\tSensitivity: 14.1mv\/pa-37db +\/- 1dB\u003cbr\u003e\n•\tPolar Pattern: Cardioid, Figure 8, Omni, super cardioid\u003cbr\u003e\n•\tImpedance: less than or equal to 50 Ohms\u003cbr\u003e\n•\tEquivalent Noise Level: 17dB (A weighted)\u003cbr\u003e\n•\tMax SPL for 0.5% THD@1000Hz: 130dB\u003cbr\u003e\n•\tConnector: 3-pin\u003cbr\u003e\n•\tIncludes a pair of custom shock mounts, a stereo mounting bar, and a road-ready flight case\u003cbr\u003e\n•\tRequires +44V to +52V phantom power\u003c\/p\u003e","published_at":"2022-07-29T15:51:09-07:00","created_at":"2022-07-29T15:51:10-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":99900,"price_min":99900,"price_max":99900,"available":false,"price_varies":false,"compare_at_price":119900,"compare_at_price_min":119900,"compare_at_price_max":119900,"compare_at_price_varies":false,"variants":[{"id":43176646377699,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE4400A-PAIR-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"sE Electronics Factory Matched Pair of sE4400A with Mounting and Case","public_title":null,"options":["Default Title"],"price":99900,"weight":907,"compare_at_price":119900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850426001460","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE4400A-PAIR-U-1.jpg?v=1659135070"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE4400A-PAIR-U-1.jpg?v=1659135070","options":["Title"],"media":[{"alt":null,"id":30499050029283,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE4400A-PAIR-U-1.jpg?v=1659135070"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE4400A-PAIR-U-1.jpg?v=1659135070","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eWhen purchased as a pair, the capsules are factory-matched for perfect tolerance, guaranteeing the best possible stereo Image. This configuration also includes a precision stereo mounting bar and two of the 4400a's custom shock mounts. The whole setup comes packaged inside a secure flight case.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e•\tA perfectly matched set of amazing multipattern condenser microphones\u003cbr\u003e\n•\tFrequency Response: 20Hz-20KHz\u003cbr\u003e\n•\t10\/20dB pads\u003cbr\u003e\n•\tSensitivity: 14.1mv\/pa-37db +\/- 1dB\u003cbr\u003e\n•\tPolar Pattern: Cardioid, Figure 8, Omni, super cardioid\u003cbr\u003e\n•\tImpedance: less than or equal to 50 Ohms\u003cbr\u003e\n•\tEquivalent Noise Level: 17dB (A weighted)\u003cbr\u003e\n•\tMax SPL for 0.5% THD@1000Hz: 130dB\u003cbr\u003e\n•\tConnector: 3-pin\u003cbr\u003e\n•\tIncludes a pair of custom shock mounts, a stereo mounting bar, and a road-ready flight case\u003cbr\u003e\n•\tRequires +44V to +52V phantom power\u003c\/p\u003e"}

Condenser Microphones

sE Electronics Large Diaphragm Cardioid Condenser Mic with Shockmount & Filter

Handcrafted 1 True Condenser Capsule: -Although the sE2200 is a cardioid-only microphone, two (instead of one) gold-sputtered diaphragms are used to ensure best possible acoustic...

Sale

Handcrafted 1 True Condenser Capsule: -Although the sE2200 is a cardioid-only microphone, two (instead of...

SKU: SE2200-U

Availability: In Stock

$349.00 $299.00

Quick View {"id":7800555897059,"title":"sE Electronics Large Diaphragm Cardioid Condenser Mic with Shockmount \u0026 Filter","handle":"se-electronics-large-diaphragm-cardioid-condenser-mic-with-shockmount-filter-se2200-u","description":"\u003cp\u003eHandcrafted 1 True Condenser Capsule: -Although the sE2200 is a cardioid-only microphone, two (instead of one) gold-sputtered diaphragms are used to ensure best possible acoustic performance. -Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in Shanghai - and unlike other microphones with backplate or electret designs, the sE2200 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect. Traditional Class-A Electronic Design: -Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2200’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances. Two Switchable Attenuation Levels \u0026amp; Low-Cut Filters: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -Selectable at either 80Hz or 160Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. Custom-Built Output Transformer: -Reviving the spirit of classic studio microphones, the sE2200’s custom transformer provides superb depth \u0026amp; weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation. All-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other affordable microphones, the sE2200's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-crafted 1\" True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 23.7 mV\/Pa (-32.5 dBV)\u003cbr\u003e\n•\tMax SPL: 125 \/ 135 \/ 145 dB (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 8 dB(A)\u003cbr\u003e\n•\tDynamic range: 117 \/ 127 \/ 137 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 86 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 4.2 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)\u003cbr\u003e\n•\tWeight: 611 g (21.55 oz.)\u003c\/p\u003e","published_at":"2022-07-29T15:50:59-07:00","created_at":"2022-07-29T15:51:00-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":29900,"price_min":29900,"price_max":29900,"available":true,"price_varies":false,"compare_at_price":34900,"compare_at_price_min":34900,"compare_at_price_max":34900,"compare_at_price_varies":false,"variants":[{"id":43176646181091,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE2200-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Large Diaphragm Cardioid Condenser Mic with Shockmount \u0026 Filter","public_title":null,"options":["Default Title"],"price":29900,"weight":907,"compare_at_price":34900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011256","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2200-U-1.jpg?v=1659135061"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2200-U-1.jpg?v=1659135061","options":["Title"],"media":[{"alt":null,"id":30499048784099,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2200-U-1.jpg?v=1659135061"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/SE2200-U-1.jpg?v=1659135061","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHandcrafted 1 True Condenser Capsule: -Although the sE2200 is a cardioid-only microphone, two (instead of one) gold-sputtered diaphragms are used to ensure best possible acoustic performance. -Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in Shanghai - and unlike other microphones with backplate or electret designs, the sE2200 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect. Traditional Class-A Electronic Design: -Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2200’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances. Two Switchable Attenuation Levels \u0026amp; Low-Cut Filters: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -Selectable at either 80Hz or 160Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. Custom-Built Output Transformer: -Reviving the spirit of classic studio microphones, the sE2200’s custom transformer provides superb depth \u0026amp; weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation. All-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other affordable microphones, the sE2200's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-crafted 1\" True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 23.7 mV\/Pa (-32.5 dBV)\u003cbr\u003e\n•\tMax SPL: 125 \/ 135 \/ 145 dB (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 8 dB(A)\u003cbr\u003e\n•\tDynamic range: 117 \/ 127 \/ 137 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 86 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20 dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 4.2 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)\u003cbr\u003e\n•\tWeight: 611 g (21.55 oz.)\u003c\/p\u003e"}

Features	___product_label_sale___ ___product_label_new___ ___product_title___ ___product_old_price______product_price___ Availability ___product_availability___ View
Availability	___product_availability___
Options	___product_options___
Vendor	___product_vendor___
Collection	___product_collection___
Rating	___product_rating___

Categories

Filters