Categories
- Accordions
- Guitars
- Bass Guitars
- Amplifiers & Effects
- Pro Audio & Recording
- DJ Gear & Lighting
- Woodwinds Instruments
- Brass Instruments
- Orchestral Strings
- Accessories
- Keyboards & Synthesizers
- Drums & Percussion
- Percussion Accessories
- Folk Instruments
- Norteño, Latin and Tejano
- Kids & Classroom Instruments
Condenser microphones are best used to capture vocals and high frequencies. They are also the preferred type of microphone for most studio applications. Also known as capacitor microphones, condenser mics are mainly used in studios because of their detail and accuracy. While dynamic microphones are popular for stage use, due to their rugged construction, condenser microphones have always been the preferred type for studio recording.
Condenser Microphones
Showing 25 to 26 of 26 products
Condenser Microphones
sE Electronics X1 Series Large Condenser Microphone and Clip
Custom-Designed, Hand-Crafted Capsule: -Just like its predecessor, the X1 S utilizes a hand-made condenser capsule, meticulously constructed, and tuned in sE’s capsule room by technicians...
Custom-Designed, Hand-Crafted Capsule: -Just like its predecessor, the X1 S utilizes a hand-made condenser capsule,...
SKU: X1-S-U
In Stock
$249.00
$179.00
Quick View
{"id":7800555733219,"title":"sE Electronics X1 Series Large Condenser Microphone and Clip","handle":"se-electronics-x1-series-large-condenser-microphone-and-clip-x1-s-u","description":"\u003cp\u003eCustom-Designed, Hand-Crafted Capsule: -Just like its predecessor, the X1 S utilizes a hand-made condenser capsule, meticulously constructed, and tuned in sE’s capsule room by technicians with decades of experience. -This results in a capsule built like the world’s finest musical instruments - and a capsule truly up to the challenge of recording them. High-Performance Electronics: -Where the original X1 was powerful, the redesigned electronics of the X1 S take its performance to a whole new level, giving it the highest dynamic range in its class. -Its internal redesign also allows for improved sensitivity, dramatically increased SPL handling (up to 160dB), and a huge reduction in self-noise. Two switchable attenuation levels: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. Two Switchable Low-Cut Filters: -Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing and Premium Finish: -Unlike the cheaply constructed bodies of some other \"entry-level\" microphones, the X1 S's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come. Gold-Plated XLR Connector: -Ensures loss-free, reliable signal connection for years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted 1\" True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 30 mV\/Pa (-30.5 dBV)\u003cbr\u003e\n•\tMax SPL: 140 \/ 150 \/ 160 dB (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 9 dB(A)\u003cbr\u003e\n•\tDynamic range: 131 \/ 141 \/ 151 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 85 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 125 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 6 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 58mm (2.28 in), Length 169mm (6.65 in)\u003cbr\u003e\n•\tWeight: 445 g (15.70 oz.)\u003c\/p\u003e","published_at":"2022-07-29T15:50:57-07:00","created_at":"2022-07-29T15:50:58-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":17900,"price_min":17900,"price_max":17900,"available":true,"price_varies":false,"compare_at_price":24900,"compare_at_price_min":24900,"compare_at_price_max":24900,"compare_at_price_varies":false,"variants":[{"id":43176646017251,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X1-S-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics X1 Series Large Condenser Microphone and Clip","public_title":null,"options":["Default Title"],"price":17900,"weight":454,"compare_at_price":24900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011188","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-U-1.jpg?v=1659135058"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-U-1.jpg?v=1659135058","options":["Title"],"media":[{"alt":null,"id":30499048063203,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-U-1.jpg?v=1659135058"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-S-U-1.jpg?v=1659135058","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCustom-Designed, Hand-Crafted Capsule: -Just like its predecessor, the X1 S utilizes a hand-made condenser capsule, meticulously constructed, and tuned in sE’s capsule room by technicians with decades of experience. -This results in a capsule built like the world’s finest musical instruments - and a capsule truly up to the challenge of recording them. High-Performance Electronics: -Where the original X1 was powerful, the redesigned electronics of the X1 S take its performance to a whole new level, giving it the highest dynamic range in its class. -Its internal redesign also allows for improved sensitivity, dramatically increased SPL handling (up to 160dB), and a huge reduction in self-noise. Two switchable attenuation levels: -The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. Two Switchable Low-Cut Filters: -Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques. All-Metal Housing and Premium Finish: -Unlike the cheaply constructed bodies of some other \"entry-level\" microphones, the X1 S's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come. Gold-Plated XLR Connector: -Ensures loss-free, reliable signal connection for years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: Hand-Crafted 1\" True Condenser\u003cbr\u003e\n•\tPolar Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tSensitivity: 30 mV\/Pa (-30.5 dBV)\u003cbr\u003e\n•\tMax SPL: 140 \/ 150 \/ 160 dB (0\/10\/20 dB pad) (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tEquivalent noise level: 9 dB(A)\u003cbr\u003e\n•\tDynamic range: 131 \/ 141 \/ 151 dB (0\/10\/20 dB Attentuation pad)\u003cbr\u003e\n•\tSignal to Noise Ratio: 85 dB\u003cbr\u003e\n•\tLow-cut filter: 80 \/ 160 Hz, 6 dB\/Oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 10 \/ 20dB, switchable\u003cbr\u003e\n•\tPowering: 48 Volts according to IEC 61938\u003cbr\u003e\n•\tElectrical Impedance: 125 Ohms\u003cbr\u003e\n•\tRecommended load impedance: \u0026gt;1k Ohms\u003cbr\u003e\n•\tCurrent consumption: 6 mA\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR connector\u003cbr\u003e\n•\tDimensions: Diameter: 58mm (2.28 in), Length 169mm (6.65 in)\u003cbr\u003e\n•\tWeight: 445 g (15.70 oz.)\u003c\/p\u003e"}
Condenser Microphones
sE Electronics X1 Series Condenser Microphone and Clip in Red & Black
All-Metal Housing & Premium Finish: -Unlike the cheaply constructed bodies of some other "entry-level" microphones, the X1 A's all-metal chassis provides efficient rejection of any...
All-Metal Housing & Premium Finish: -Unlike the cheaply constructed bodies of some other "entry-level" microphones,...
SKU: X1-A-RED-U
In Stock
$149.00
$99.00
Quick View
{"id":7800555700451,"title":"sE Electronics X1 Series Condenser Microphone and Clip in Red \u0026 Black","handle":"se-electronics-x1-series-condenser-microphone-and-clip-in-red-black-x1-a-red-u","description":"\u003cp\u003eAll-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other \"entry-level\" microphones, the X1 A's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come. Integrated Windscreen: -Eliminates the need for an external pop filter and provides an extra layer of safety and security for the all-important capsule. Completely New Acoustic Design: -The X1 A's new condenser capsule design is a work of art, delivering stellar sonic performance on any source with incredible speed, accuracy, and well-balanced frequency response. -The electronics have also undergone a complete overhaul and exhibit better specifications and sound - on and off the test bench - than any other microphone in its class. Attenuation \u0026amp; Low-Cut Switches: -The -20 dB pad switch on the left provides extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -On the right, the 100 Hz low-cut switch helps eliminate low-frequency rumble or footfall noise and compensates for excessive bass with close-mic techniques (proximity effect). Gold-Plated XLR Connector: -Ensures loss-free, reliable signal connection for years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 2\/3\" Permanently Biased Condenser\u003cbr\u003e\n•\tDirectional Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tSensitivity: 20 mV\/Pa (-34 dB)\u003cbr\u003e\n•\tMax SPL: 130 \/ 150 dB (0 \/ 20 dB pad, (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB(A)\u003cbr\u003e\n•\tEquivalent Noise Level: 16 dB(A)\u003cbr\u003e\n•\tDynamic Range: 114 \/ 134 dB (0 \/ 20 dB pad)\u003cbr\u003e\n•\tLow Cut Filter: 100 Hz, 6 dB\/oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR\u003cbr\u003e\n•\tPower requirement: 48V phantom according to IEC 61938\u003cbr\u003e\n•\tRecommended Load Impedance: \u0026gt;1K Ohms\u003cbr\u003e\n•\tCurrent Consumption: 4.0 mA\u003cbr\u003e\n•\tDiameter: 58 mm (2.28 in.) \u003cbr\u003e\n•\tLength: 169 mm (6.65 in.)\u003cbr\u003e\n•\tWeight: 390 g \/ 13.8 oz\u003c\/p\u003e","published_at":"2022-07-29T15:50:55-07:00","created_at":"2022-07-29T15:50:56-07:00","vendor":"sE Electronics","type":"Condenser Microphones","tags":["Condenser Microphones"],"price":9900,"price_min":9900,"price_max":9900,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":43176645951715,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X1-A-RED-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics X1 Series Condenser Microphone and Clip in Red \u0026 Black","public_title":null,"options":["Default Title"],"price":9900,"weight":454,"compare_at_price":14900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011980","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-RED-U-1.jpg?v=1659135056"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-RED-U-1.jpg?v=1659135056","options":["Title"],"media":[{"alt":null,"id":30499047801059,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-RED-U-1.jpg?v=1659135056"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1362\/0637\/products\/X1-A-RED-U-1.jpg?v=1659135056","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAll-Metal Housing \u0026amp; Premium Finish: -Unlike the cheaply constructed bodies of some other \"entry-level\" microphones, the X1 A's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come. Integrated Windscreen: -Eliminates the need for an external pop filter and provides an extra layer of safety and security for the all-important capsule. Completely New Acoustic Design: -The X1 A's new condenser capsule design is a work of art, delivering stellar sonic performance on any source with incredible speed, accuracy, and well-balanced frequency response. -The electronics have also undergone a complete overhaul and exhibit better specifications and sound - on and off the test bench - than any other microphone in its class. Attenuation \u0026amp; Low-Cut Switches: -The -20 dB pad switch on the left provides extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums. -On the right, the 100 Hz low-cut switch helps eliminate low-frequency rumble or footfall noise and compensates for excessive bass with close-mic techniques (proximity effect). Gold-Plated XLR Connector: -Ensures loss-free, reliable signal connection for years.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tCapsule Type: 2\/3\" Permanently Biased Condenser\u003cbr\u003e\n•\tDirectional Pattern: Cardioid\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: \u0026lt;50 Ohms\u003cbr\u003e\n•\tSensitivity: 20 mV\/Pa (-34 dB)\u003cbr\u003e\n•\tMax SPL: 130 \/ 150 dB (0 \/ 20 dB pad, (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 78 dB(A)\u003cbr\u003e\n•\tEquivalent Noise Level: 16 dB(A)\u003cbr\u003e\n•\tDynamic Range: 114 \/ 134 dB (0 \/ 20 dB pad)\u003cbr\u003e\n•\tLow Cut Filter: 100 Hz, 6 dB\/oct, switchable\u003cbr\u003e\n•\tAttenuation Pad: 20 dB, switchable\u003cbr\u003e\n•\tConnectivity: 3-pin male XLR\u003cbr\u003e\n•\tPower requirement: 48V phantom according to IEC 61938\u003cbr\u003e\n•\tRecommended Load Impedance: \u0026gt;1K Ohms\u003cbr\u003e\n•\tCurrent Consumption: 4.0 mA\u003cbr\u003e\n•\tDiameter: 58 mm (2.28 in.) \u003cbr\u003e\n•\tLength: 169 mm (6.65 in.)\u003cbr\u003e\n•\tWeight: 390 g \/ 13.8 oz\u003c\/p\u003e"}
