The VR2, an active ribbon that can take violins and voices right to the foreground of your listener's stereo. The VR ribbon microphones from sE mark a new era for ribbon mic technology. Until the VR Series, the only ribbon mic in the world to perform across 20Hz-20kHz was our own Rupert Neve collaboration, the RNR1. This was achieved using state-of-the-art custom transformers and a Rupert Neve-designed circuit to reveal HF usually absent. With the VR mics, full frequency response is achieved using a clever mechanical device designed by Siwei Zou, the company CEO, and a hand-tensioned ribbon constructed by our highly specialized technicians in sE's capsule room.
Specifications:
• Electronics: Active
• Generating Element: Hand-tensioned 2.5µm aluminum ribbon
• Directional Pattern: Figure-8
• Frequency range: 20 Hz - 18 kHz
• Impedance: 200 Ohms
• Sensitivity: 10 mV/Pa (-40 dB)
• Max SPL: 135 dB (0.5% THD @ 1kHz)
• Signal to Noise Ratio: 76 dB
• Self-Noise: 18 dB(A)
• Matching Connectors: XLR3F
• Power requirement: 48V Phantom
• Dimensions: Length: 33mm (1.30 in.) Width: 19.5mm (0.77 in) Height: 187mm (7.36 in)
• Weight: 360 g / 12.70 oz.
Quick View
{"id":7800556978403,"title":"sE Electronics Voodoo Passive Ribbon Microphone with Shockmount and Case","handle":"se-electronics-voodoo-passive-ribbon-microphone-with-shockmount-and-case-vr1-u","description":"\u003cp\u003eThe VR1, a passive ribbon to bring out the bite and edge from your guitar cabs with no muddy highs. The VR ribbon microphones from sE mark a new era for ribbon mic technology. Until the VR Series, the only ribbon mic in the world to perform across 20Hz-18kHz was our own Rupert Neve collaboration, the RNR1. This was achieved using state-of-the-art custom transformers and a Rupert Neve-designed circuit to reveal HF usually absent. With the VR mics, full frequency response is achieved using a clever mechanical device designed by Siwei Zou, the company CEO, and a hand-tensioned ribbon constructed by our highly specialized technicians in sE's capsule room.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tElectronics: Passive\u003cbr\u003e\n•\tGenerating Element: Hand-tensioned 2.5µm aluminum ribbon\u003cbr\u003e\n•\tDirectional Pattern: Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 18 kHz\u003cbr\u003e\n•\tImpedance: 300 Ohms\u003cbr\u003e\n•\tSensitivity: 1.78 mV\/Pa (-55 dB)\u003cbr\u003e\n•\tMax SPL: 135 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 75 dB\u003cbr\u003e\n•\tSelf-Noise: 19 dB(A)\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: N\/A (phantom-protected)\u003cbr\u003e\n•\tDimensions: Length: 33mm (1.30 in.) Width: 19.5mm (0.77 in) Height: 127mm (5.00 in)\u003cbr\u003e\n•\tWeight: 230g \/ 8.11oz\u003c\/p\u003e","published_at":"2022-07-29T15:51:32-07:00","created_at":"2022-07-29T15:51:33-07:00","vendor":"sE Electronics","type":"Ribbon Microphones","tags":["Ribbon Microphones"],"price":39900,"price_min":39900,"price_max":39900,"available":true,"price_varies":false,"compare_at_price":49900,"compare_at_price_min":49900,"compare_at_price_max":49900,"compare_at_price_varies":false,"variants":[{"id":43176648311011,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VR1-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Voodoo Passive Ribbon Microphone with Shockmount and Case","public_title":null,"options":["Default Title"],"price":39900,"weight":907,"compare_at_price":49900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819032011096","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.playmusic123.com\/cdn\/shop\/products\/VR1-U-1.jpg?v=1659135093"],"featured_image":"\/\/www.playmusic123.com\/cdn\/shop\/products\/VR1-U-1.jpg?v=1659135093","options":["Title"],"media":[{"alt":null,"id":30499052978403,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"\/\/www.playmusic123.com\/cdn\/shop\/products\/VR1-U-1.jpg?v=1659135093"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"\/\/www.playmusic123.com\/cdn\/shop\/products\/VR1-U-1.jpg?v=1659135093","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe VR1, a passive ribbon to bring out the bite and edge from your guitar cabs with no muddy highs. The VR ribbon microphones from sE mark a new era for ribbon mic technology. Until the VR Series, the only ribbon mic in the world to perform across 20Hz-18kHz was our own Rupert Neve collaboration, the RNR1. This was achieved using state-of-the-art custom transformers and a Rupert Neve-designed circuit to reveal HF usually absent. With the VR mics, full frequency response is achieved using a clever mechanical device designed by Siwei Zou, the company CEO, and a hand-tensioned ribbon constructed by our highly specialized technicians in sE's capsule room.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tElectronics: Passive\u003cbr\u003e\n•\tGenerating Element: Hand-tensioned 2.5µm aluminum ribbon\u003cbr\u003e\n•\tDirectional Pattern: Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 18 kHz\u003cbr\u003e\n•\tImpedance: 300 Ohms\u003cbr\u003e\n•\tSensitivity: 1.78 mV\/Pa (-55 dB)\u003cbr\u003e\n•\tMax SPL: 135 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 75 dB\u003cbr\u003e\n•\tSelf-Noise: 19 dB(A)\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: N\/A (phantom-protected)\u003cbr\u003e\n•\tDimensions: Length: 33mm (1.30 in.) Width: 19.5mm (0.77 in) Height: 127mm (5.00 in)\u003cbr\u003e\n•\tWeight: 230g \/ 8.11oz\u003c\/p\u003e"}
Quick View
{"id":7800557175011,"title":"sE Electronics Rupert Neve Signature Active Ribbon Microphone","handle":"se-electronics-rupert-neve-signature-active-ribbon-microphone-rnr1-u","description":"\u003cp\u003eThe Transformers: -Nobody knows audio transformers better than Rupert Neve, and ribbon mics require more transformer attention than any other. This is because the transformer that couples the ribbon to the output needs to accomplish a massive impedance conversion. With the RNR1, two custom Rupert Neve-designed transformers form the buffer between the ribbon and the outside world. The circuitry between those transformers helps maintain the ultra-wide frequency response, compensating for the ribbon's natural predisposition to roll it off, and thus high-frequency content is preserved. The Ribbon: -During the RNR1's development, a full year was spent working on crafting a ribbon element that would provide the extended response that Mr. Neve demanded. After experimenting with ribbon materials available from all corners of the world, the design team landed on the 2.5µm aluminum ribbon used in the RNR1, striking the perfect balance of flexibility and stiffness needed for this microphone's exceptional performance. The Shape: -As with many sE microphones, the RNR1 has an unusual and bold design aesthetic, with the form following the function. The precision-machined and scalloped edges don't just look vibrant and dramatic, they have also been custom-designed to provide the ribbon with an acoustically ideal setting for the best possible frequency response. Matte Black Finish: -The matte black finish means the mic remains unobtrusive and doesn't draw any unnecessary attention to itself under harsh stage or studio lighting. Custom Shock Mount: -The RNR1 includes a custom-designed and easy-to-use shock mount, which is essential in use to reduce the unwanted effects of vibration or knocks to the supporting microphone stand.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tElectronics: Active\u003cbr\u003e\n•\tGenerating Element: Hand-tensioned 2.5µm aluminum ribbon\u003cbr\u003e\n•\tDirectional Pattern: Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 25 mV\/Pa (-32 dB)\u003cbr\u003e\n•\tMax SPL: 137 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 77 dB\u003cbr\u003e\n•\tSelf-Noise: 17 dB(A)\u003cbr\u003e\n•\tLow Cut Filter Switch: 100 Hz\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 860g \/ 30.34oz\u003c\/p\u003e","published_at":"2022-07-29T15:51:37-07:00","created_at":"2022-07-29T15:51:38-07:00","vendor":"sE Electronics","type":"Ribbon Microphones","tags":["Ribbon Microphones"],"price":209900,"price_min":209900,"price_max":209900,"available":true,"price_varies":false,"compare_at_price":249900,"compare_at_price_min":249900,"compare_at_price_max":249900,"compare_at_price_varies":false,"variants":[{"id":43176648540387,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RNR1-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics Rupert Neve Signature Active Ribbon Microphone","public_title":null,"options":["Default Title"],"price":209900,"weight":907,"compare_at_price":249900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850426001491","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.playmusic123.com\/cdn\/shop\/products\/RNR1-U-1.jpg?v=1659135099"],"featured_image":"\/\/www.playmusic123.com\/cdn\/shop\/products\/RNR1-U-1.jpg?v=1659135099","options":["Title"],"media":[{"alt":null,"id":30499053568227,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"\/\/www.playmusic123.com\/cdn\/shop\/products\/RNR1-U-1.jpg?v=1659135099"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"\/\/www.playmusic123.com\/cdn\/shop\/products\/RNR1-U-1.jpg?v=1659135099","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Transformers: -Nobody knows audio transformers better than Rupert Neve, and ribbon mics require more transformer attention than any other. This is because the transformer that couples the ribbon to the output needs to accomplish a massive impedance conversion. With the RNR1, two custom Rupert Neve-designed transformers form the buffer between the ribbon and the outside world. The circuitry between those transformers helps maintain the ultra-wide frequency response, compensating for the ribbon's natural predisposition to roll it off, and thus high-frequency content is preserved. The Ribbon: -During the RNR1's development, a full year was spent working on crafting a ribbon element that would provide the extended response that Mr. Neve demanded. After experimenting with ribbon materials available from all corners of the world, the design team landed on the 2.5µm aluminum ribbon used in the RNR1, striking the perfect balance of flexibility and stiffness needed for this microphone's exceptional performance. The Shape: -As with many sE microphones, the RNR1 has an unusual and bold design aesthetic, with the form following the function. The precision-machined and scalloped edges don't just look vibrant and dramatic, they have also been custom-designed to provide the ribbon with an acoustically ideal setting for the best possible frequency response. Matte Black Finish: -The matte black finish means the mic remains unobtrusive and doesn't draw any unnecessary attention to itself under harsh stage or studio lighting. Custom Shock Mount: -The RNR1 includes a custom-designed and easy-to-use shock mount, which is essential in use to reduce the unwanted effects of vibration or knocks to the supporting microphone stand.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tElectronics: Active\u003cbr\u003e\n•\tGenerating Element: Hand-tensioned 2.5µm aluminum ribbon\u003cbr\u003e\n•\tDirectional Pattern: Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 20 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 25 mV\/Pa (-32 dB)\u003cbr\u003e\n•\tMax SPL: 137 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 77 dB\u003cbr\u003e\n•\tSelf-Noise: 17 dB(A)\u003cbr\u003e\n•\tLow Cut Filter Switch: 100 Hz\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: 48V phantom\u003cbr\u003e\n•\tWeight: 860g \/ 30.34oz\u003c\/p\u003e"}
Quick View
{"id":7800556912867,"title":"sE Electronics X1 Series Ribbon Microphone and Clip","handle":"se-electronics-x1-series-ribbon-microphone-and-clip-x1-r-u","description":"\u003cp\u003eThe second addition to the X1 Series, the X1 R brings the magic of traditional ribbon mics into the modern age with a tough construction that can handle any SPL. This is a ribbon you can take on the road. The sE X1 R ribbon microphone is a high-performance passive ribbon from sE Electronics. The sE Electronics X1 R is suited to a variety of recording applications including guitar cabs, overhead drums, brass, woodwind, strings, commercial broadcast, and voice-over. This state-of-the-art ribbon element enclosed by top-grade Neodymium magnets boasts some of our latest ribbon microphone technologies. We have combined our traditional ribbon technology with some of the mechanical elements of our own VR1\/VR2 microphone HF (High Frequency) extension technology to bring you a classic sounding ribbon mic with a gentle HF lift. The X1 R doesn't quite offer the full-frequency response performance of the VR1, VR2, or the widely acclaimed Rupert Neve Signature Series RNR1 - but its hybrid old and new ribbon technology gives you all the natural beauty of the ribbon sound, but with more versatility and ease of use than most ribbons on today's market. The X1 R comes standard with a mic clip that will securely attach it to any mic stand but fits the Isolation Pack if a shock mount solution is desired.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tElectronics: Passive\u003cbr\u003e\n•\tGenerating Element: Hand-tensioned 2.5µm aluminum ribbon\u003cbr\u003e\n•\tDirectional Pattern: Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 16 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 1.78 mV\/Pa (-55 dB)\u003cbr\u003e\n•\tMax SPL: 135 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 71 dB\u003cbr\u003e\n•\tSelf-Noise: 23 dB(A)\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: N\/A (phantom-protected)\u003cbr\u003e\n•\tWeight: 510g \/ 17.99oz\u003c\/p\u003e","published_at":"2022-07-29T15:51:30-07:00","created_at":"2022-07-29T15:51:31-07:00","vendor":"sE Electronics","type":"Ribbon Microphones","tags":["Ribbon Microphones"],"price":24900,"price_min":24900,"price_max":24900,"available":true,"price_varies":false,"compare_at_price":29900,"compare_at_price_min":29900,"compare_at_price_max":29900,"compare_at_price_varies":false,"variants":[{"id":43176648212707,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X1-R-U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"sE Electronics X1 Series Ribbon Microphone and Clip","public_title":null,"options":["Default Title"],"price":24900,"weight":907,"compare_at_price":29900,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"850426001941","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.playmusic123.com\/cdn\/shop\/products\/X1-R-U-1.jpg?v=1659135091"],"featured_image":"\/\/www.playmusic123.com\/cdn\/shop\/products\/X1-R-U-1.jpg?v=1659135091","options":["Title"],"media":[{"alt":null,"id":30499052683491,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"\/\/www.playmusic123.com\/cdn\/shop\/products\/X1-R-U-1.jpg?v=1659135091"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"\/\/www.playmusic123.com\/cdn\/shop\/products\/X1-R-U-1.jpg?v=1659135091","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe second addition to the X1 Series, the X1 R brings the magic of traditional ribbon mics into the modern age with a tough construction that can handle any SPL. This is a ribbon you can take on the road. The sE X1 R ribbon microphone is a high-performance passive ribbon from sE Electronics. The sE Electronics X1 R is suited to a variety of recording applications including guitar cabs, overhead drums, brass, woodwind, strings, commercial broadcast, and voice-over. This state-of-the-art ribbon element enclosed by top-grade Neodymium magnets boasts some of our latest ribbon microphone technologies. We have combined our traditional ribbon technology with some of the mechanical elements of our own VR1\/VR2 microphone HF (High Frequency) extension technology to bring you a classic sounding ribbon mic with a gentle HF lift. The X1 R doesn't quite offer the full-frequency response performance of the VR1, VR2, or the widely acclaimed Rupert Neve Signature Series RNR1 - but its hybrid old and new ribbon technology gives you all the natural beauty of the ribbon sound, but with more versatility and ease of use than most ribbons on today's market. The X1 R comes standard with a mic clip that will securely attach it to any mic stand but fits the Isolation Pack if a shock mount solution is desired.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003e•\tElectronics: Passive\u003cbr\u003e\n•\tGenerating Element: Hand-tensioned 2.5µm aluminum ribbon\u003cbr\u003e\n•\tDirectional Pattern: Figure-8\u003cbr\u003e\n•\tFrequency range: 20 Hz - 16 kHz\u003cbr\u003e\n•\tImpedance: 200 Ohms\u003cbr\u003e\n•\tSensitivity: 1.78 mV\/Pa (-55 dB)\u003cbr\u003e\n•\tMax SPL: 135 dB (0.5% THD @ 1kHz)\u003cbr\u003e\n•\tSignal to Noise Ratio: 71 dB\u003cbr\u003e\n•\tSelf-Noise: 23 dB(A)\u003cbr\u003e\n•\tMatching Connectors: XLR3F\u003cbr\u003e\n•\tPower requirement: N\/A (phantom-protected)\u003cbr\u003e\n•\tWeight: 510g \/ 17.99oz\u003c\/p\u003e"}
